Για ενα σύντομο διάστημα παρατήρησα πως η νέα Nova πρόσφερε σε κάποιες νέες συνδέσεις της (κυρίως 24άρες, αλλά το είδα και σε μία 50άρα) το παραπάνω CPE.
Το ρούτερ αυτό το είδα μόνο από δύο φίλους που τρεξαν στη συγχώνευση πέρυσι για να αλλάξουν πάροχο, καθώς και σημερα , σε ένα μικρο καφέ της γειτονιάς όπου παίρνω καθημερινά τον καφέ μου...
άκουσα τον ιδιοκτήτη να μιλάει αγανακτισμένος με την υποστήριξη για κάποιο πρόβλημα, οπότε παρενέβην για να δω αν μπορούσα να βοηθήσω...
Από τότε δεν το έχω ξαναδεί πουθενά και δεν έχω ακούσει καμία αναφορά για αυτό ούτε εδώ στο φόρουμ ούτε κάπου αλλού. Αυτο μου κίνησε το ενδιαφέρον καθώς φαινεται πως εχουμε να κανουμε με
καποιο CPE που κυκλοφόρησε για καποιο πολυ μικρο χρονικό διάστημα και για καποιο λογο το σταμάτησαν απο τη κυκλοφορία; ή ηταν καποιο artifact της ενωσης των 2 εταιριων ;
εδω καποιες φωτογραφίες που βρήκα ή μου στειλαν :
εχουμε καποιο insight για το τι επαιξε με αυτο το μικρουλι ρουτερ; (ειναι μικρότερο απο το H108! )
Εμφάνιση 1-13 από 13
Θέμα: Zyxel VMG1312-T20B
-
09-05-24, 13:46 Zyxel VMG1312-T20B #1
- Εγγραφή
- 07-07-2014
- Περιοχή
- Θεσσαλονίκη
- Μηνύματα
- 949
- Downloads
- 4
- Uploads
- 0
- Τύπος
- VDSL2
- Ταχύτητα
- 112640/11255 D/U
- ISP
- ΟΤΕ Conn-x
- DSLAM
- ΟΤΕ - ΑΠ. ΠΑΥΛΟΣ
- Router
- pfsense & TG789vac rooted
- SNR / Attn
- 15.4(dB) / 11(dB)
- Path Level
- Interleaved
Τελευταία επεξεργασία από το μέλος finos : 09-05-24 στις 17:31.
-
09-05-24, 18:45 Απάντηση: Zyxel VMG1312-T20B #2
- Εγγραφή
- 04-08-2020
- Μηνύματα
- 75
- Downloads
- 3
- Uploads
- 0
- ISP
- .
EOL
https://webservice.zyxel.com/end-of-life
https://download.zyxel.com/VMG1312-T...(ABSB.5)C0.zip firmware download,
στειλε κανα nmap
αν εχει ssh λογικα παρομοιο bootloader hack με το VMG8623, αλλιως uart με καποιον απο τους κωδικους απο το https://github.com/boginw/zyxel-vmg8...ster/README.md για unbranding αναλογα τι zloader παιζει.
-
09-05-24, 19:00 Απάντηση: Zyxel VMG1312-T20B #3
- Εγγραφή
- 07-07-2014
- Περιοχή
- Θεσσαλονίκη
- Μηνύματα
- 949
- Downloads
- 4
- Uploads
- 0
- Τύπος
- VDSL2
- Ταχύτητα
- 112640/11255 D/U
- ISP
- ΟΤΕ Conn-x
- DSLAM
- ΟΤΕ - ΑΠ. ΠΑΥΛΟΣ
- Router
- pfsense & TG789vac rooted
- SNR / Attn
- 15.4(dB) / 11(dB)
- Path Level
- Interleaved
EndOfLife λοιπον . Αρα για αυτο το μαζεψαν κακην κακως απο τη Nova-wind ...
Αρχικό μήνυμα από notupus
EOL
https://webservice.zyxel.com/end-of-life
https://download.zyxel.com/VMG1312-T...(ABSB.5)C0.zip firmware download,
στειλε κανα nmap
αν εχει ssh λογικα παρομοιο bootloader hack με το VMG8623, αλλιως uart με καποιον απο τους κωδικους απο το https://github.com/boginw/zyxel-vmg8...ster/README.md για unbranding αναλογα τι zloader παιζει.
Ποιος ξερει μπορει να το φεραν για ρουτερ στις μικρες γραμες 24ρες πχ που δινανε τα h108 & να εσκασε το EOL και να το σταματησαν .
Το πρωι που περασα απο το καφε , μου ειπε οτι του αλλάξαν ρουτερ "με ενα θυριο τεραστιο ασπρο ιδια μαρκα" (το 8623 λογικα θα στειλαν ,for the reccord ιντερεντ γιοκ παλι
) και του μεινε το 1312 στη ακρη ... θα του το ζητησω αυριο για να το ξεψαχνισω και θα επανελθω !
ετσι κι αλλιως η nova τα μεριάζει σα καραμελες ....
-
09-05-24, 20:12 Απάντηση: Zyxel VMG1312-T20B #4
- Εγγραφή
- 21-06-2006
- Περιοχή
- Περιστέρι
- Μηνύματα
- 6.790
- Downloads
- 15
- Uploads
- 5
- Άρθρα
- 1
- Τύπος
- ADSL
- Ταχύτητα
- 384/128
- ISP
- Vivodi
- DSLAM
- ΟΤΕ - ΠΕΡΙΣΤΕΡΙ
- Router
- Zyxel 652-R
- SNR / Attn
- 14(dB) / 34(dB)
- Path Level
- Interleaved
Έπαιζε μέχρι 100Mbps, προφίλ 17a μόνο, δεν υποστήριζε ευρυζωνική τηλεφωνία και το σταμάτησαν Ήταν σαν το ZTE H108L.
Πως να μετατρέψετε το Linksys WRT320N σε Linksys Ε2000
Router Dynalink DL-WRX36 : OpenWrt 23.05.2 Shapshot
Modem Zyxel VMG8623-T50B : Firmware Version: V5.50(ABPM.8.3)C0
-
11-05-24, 14:10 Απάντηση: Zyxel VMG1312-T20B #5
- Εγγραφή
- 07-07-2014
- Περιοχή
- Θεσσαλονίκη
- Μηνύματα
- 949
- Downloads
- 4
- Uploads
- 0
- Τύπος
- VDSL2
- Ταχύτητα
- 112640/11255 D/U
- ISP
- ΟΤΕ Conn-x
- DSLAM
- ΟΤΕ - ΑΠ. ΠΑΥΛΟΣ
- Router
- pfsense & TG789vac rooted
- SNR / Attn
- 15.4(dB) / 11(dB)
- Path Level
- Interleaved
nmap: Αρχικό μήνυμα από notupus
στειλε κανα nmap
Δουλεψε το script που εχω στο github εδω και πηρα root shellΚώδικας:PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 23/tcp open telnet 53/tcp open domain 80/tcp open http 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 2601/tcp open zebra 49152/tcp open unknown
το zycli sys atsh εδωσε :
Κώδικας:Firmware Version : V5.30(ABWL.0)b4 Bootbase Version : V1.32 | 07/09/2020 10:21:25 Vendor Name : Zyxel Communications Corp. Product Model : VMG1312-T20B Serial Number : [S/N] First MAC Address : [MAC] Last MAC Address : [MAC] MAC Address Quantity : 08 Default Country Code : F7 Boot Module Debug Flag : 00 Kernel Checksum : CA487D39 RootFS Checksum : 6301BE05 Romfile Checksum : 00004696 Main Feature Bits : 00 Other Feature Bits : 7fadf9b1: 04050508 00000100 00000000 00000000 7fadf9c1: 00000000 00000000 00000000 0000
προφανως dumpαρα τον Bootloader , αλλα δεν μπορεσα να βρω το Model id ....
Για οποιον θελει να ασχοληθει , τον εχω ανεβασει εδω
(μαρεσε παντως το μικρο ... εχει ... "Χαρακτηρα"
)
-
11-05-24, 14:55 Απάντηση: Zyxel VMG1312-T20B #6
- Εγγραφή
- 04-08-2020
- Μηνύματα
- 75
- Downloads
- 3
- Uploads
- 0
- ISP
- .
0xffc1 to 0xffc4 ειναι το model id, λογικα τηα πρεπει να σε αφηνει απλα να περασεις το firmware απο το updater? το firmware της zyxel εχει το ιδιο model id, αν δεν σε αφινει τοτε zycli fwidcheck off , αν δεν σε αφισει τοτε η πρεπει να κανουμε "μεταβατικο firmware" Ουσιαστικα να αλλαξουμε το fwid στο header του firmware της zyxel η να περαστει με uart, επεισης ενδιαφερον θα ηταν να δοκιμαστει το ATEN exploit ( https://www.adslgr.com/forum/threads...ble-Debug-Mode )και το https://github.com/janh/go-dsl (σε mediatec ssh mode), πιθανων να μπορει να περαστει το firmware του vmg8623-t50b αν αλλαξει κανεις το sdk και επιλεξει τα σωστα kernel module αλλα αυτο λογικα μονο για κανα επιπλεον feature οπως το wpa3? δοκιμαστικα εκανα αλλαγη στο header και δεν εχω ιδεα αν θα δουλεψει αλλα το εχω ανεβασει εδω Αρχικό μήνυμα από finos
προφανως dumpαρα τον Bootloader , αλλα δεν μπορεσα να βρω το Model id ....
Για οποιον θελει να ασχοληθει , τον εχω ανεβασει εδω
(μαρεσε παντως το μικρο ... εχει ... "Χαρακτηρα" )
-
11-05-24, 15:17 Απάντηση: Zyxel VMG1312-T20B #7
- Εγγραφή
- 07-07-2014
- Περιοχή
- Θεσσαλονίκη
- Μηνύματα
- 949
- Downloads
- 4
- Uploads
- 0
- Τύπος
- VDSL2
- Ταχύτητα
- 112640/11255 D/U
- ISP
- ΟΤΕ Conn-x
- DSLAM
- ΟΤΕ - ΑΠ. ΠΑΥΛΟΣ
- Router
- pfsense & TG789vac rooted
- SNR / Attn
- 15.4(dB) / 11(dB)
- Path Level
- Interleaved
Θα το δοκιμασω με τη επιστροφη στη "βαση" . θα το κανω και μια ...επεμβαση για να δω τι φοραει απο soc , Μνημες κτλ Αρχικό μήνυμα από notupus
0xffc1 to 0xffc4 ειναι το model id, λογικα τηα πρεπει να σε αφηνει απλα να περασεις το firmware απο το updater? το firmware της zyxel εχει το ιδιο model id, αν δεν σε αφινει τοτε zycli fwidcheck off , αν δεν σε αφισει τοτε η πρεπει να κανουμε "μεταβατικο firmware" Ουσιαστικα να αλλαξουμε το fwid στο header του firmware της zyxel η να περαστει με uart, επεισης ενδιαφερον θα ηταν να δοκιμαστει το ATEN exploit ( https://www.adslgr.com/forum/threads...ble-Debug-Mode )και το https://github.com/janh/go-dsl (σε mediatec ssh mode), πιθανων να μπορει να περαστει το firmware του vmg8623-t50b αν αλλαξει κανεις το sdk και επιλεξει τα σωστα kernel module αλλα αυτο λογικα μονο για κανα επιπλεον feature οπως το wpa3? δοκιμαστικα εκανα αλλαγη στο header και δεν εχω ιδεα αν θα δουλεψει αλλα το εχω ανεβασει εδω
Στο UI μεσα παντως ειναι Branded με το λογοτυπο της wind .
-
11-05-24, 15:36 Απάντηση: Zyxel VMG1312-T20B #8
- Εγγραφή
- 04-08-2020
- Μηνύματα
- 75
- Downloads
- 3
- Uploads
- 0
- ISP
- .
Με βαση το bootloader θα βρεις ενα en7512( https://web.archive.org/web/20210420...&product_id=33 ) 700MHz single-core mips 34kc με ενα afe EN7556N. Θεωρητικα υποστηρίζει interleaved/fastpath Vectoring 17a g.inp max 150/50. Στειλε φωτο τα μεσα
-
11-05-24, 18:18 Απάντηση: Zyxel VMG1312-T20B #9
- Εγγραφή
- 07-07-2014
- Περιοχή
- Θεσσαλονίκη
- Μηνύματα
- 949
- Downloads
- 4
- Uploads
- 0
- Τύπος
- VDSL2
- Ταχύτητα
- 112640/11255 D/U
- ISP
- ΟΤΕ Conn-x
- DSLAM
- ΟΤΕ - ΑΠ. ΠΑΥΛΟΣ
- Router
- pfsense & TG789vac rooted
- SNR / Attn
- 15.4(dB) / 11(dB)
- Path Level
- Interleaved
Αρχικό μήνυμα από notupus
Στειλε φωτο τα μεσα
Δε προσπάθησα να βγαλω τη ψυκτρα του soc , αφου εχουμε το Part no του..
Βλεπω υπαρχει θεση για (μαλλον) EthWan πορτα οπου ειναι Unpopulated και το jack αλλα και το transformer του ethernet .
Και μια που το ειχα ανοιχτο , πηρα και ενα Boot log , να υπαρχει ...
Spoiler:Κώδικας:KGD IC Xtal:1 DDR2 init. DRAMC init done. Calculate size. DRAM size=128MB Set new TRFC. ddr-800 7512DRAMC V1.2.2 (0) Set SPI Flash Clock to 83 Mhz EN751221 at Thu Jul 9 10:21:26 CST 2020 version 1.1 free bootbase Memory size 128MB Set SPI Flash Clock to 83 Mhz spi_nand_probe: mfr_id=0xef, dev_id=0xaa Dected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success ZyXEL zloader v1.3.2 (07/09/2020 - 10:21:25) Multiboot client version: 2.3 Hit any key to stop autoboot: 0 ==> boot flag = 1 slave tclinux.bin have ZYXEL trx header! from slave Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000 Uncompressing [LZMA] ... done. Linux version 2.6.36 (yenchun@robin-Veriton-X2611G) (gcc version 4.3.6 (OpenWrt GCC 4.3.6 unknown) ) #7 SMP Mon Jun 7 22:11:02 CST 2021 ISPRAM0: PA=00380000,Size=00010000,enabled memsize:128MB EcoNet EN751221 SOC prom init bootconsole [early0] enabled CPU revision is: 00019558 (MIPS 34Kc) Determined physical RAM map: memory: 07fe0000 @ 00020000 (usable) Wasting 1024 bytes for tracking 32 unused pages Zone PFN ranges: Normal 0x00000020 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000020 -> 0x00008000 3 available secondary CPU TC(s) PERCPU: Embedded 7 pages/cpu @81103000 s7264 r8192 d13216 u65536 pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 Kernel command line: es=1 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=0007e46f Readback ErrCtl register=0007e46f nmi base is 8115c200 Memory: 124940k/130944k available (3640k kernel code, 6004k reserved, 729k data, 212k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:64 CPU frequency 700.00 MHz Using 199.968 MHz high precision timer. console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Calibrating delay loop... 465.30 BogoMIPS (lpj=2326528) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 34K sync es set to 1. Config7: 0x80080500 Limit of 4 TCs set TLB of 64 entry pairs shared by 2 VPEs VPE 0: TC 0 1 2, VPE 1: TC 3 IPI buffer pool of 16 buffers CPU revision is: 00019558 ((null)) TC 1 going on-line as CPU 1 CPU revision is: 00019558 ((null)) TC 2 going on-line as CPU 2 CPU revision is: 00019558 ((null)) TC 3 going on-line as CPU 3 Brought up 4 CPUs kworker/u:0 used greatest stack depth: 14864 bytes left NET: Registered protocol family 16 PCIe driver version: 751221.3.20160516 MT7512_pcie_init check pcie link up status: isRC0_LINKUP=1 isRC1_LINKUP=0 registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x2000 0000-0x200fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI bridge to [bus 02-02] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem disabled] pci 0000:00:01.0: bridge window [mem pref disabled] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 mt7512_pcie_fixup: 0x1438 = 20000014 TC3162 hardware watchdog module loaded. USB overcurrent protection. squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 244 io scheduler noop registered (default) ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162 brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6) SPI_NAND_Flash_init: before init, mtx_mode_tog=0xl9, manaul_en=0x1 spi_nand_probe: mfr_id=0xef, dev_id=0xaa Dected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x01000000 at 0x1c000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter NAND device: Manufacturer ID: 0xef, Chip ID: 0xaa (Unknown _SPI_NAND_DEVICE_ID_W 25N01G) nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 calc_bmt_pool_size : need_valid_block_num=0x51, total_block=0x400 bmt pool size: 81 BMT & BBT Init Success parsing <0[bootloader],0[romfile],56M[tclinux],-[tclinux_slave],1M[wwan],4M[data ],1M[rom-d]> partition 10: name <rom-d>, offset ffffffff, size 100000, mask flags 0 partition 9: name <data>, offset ffffffff, size 400000, mask flags 0 partition 8: name <wwan>, offset ffffffff, size 100000, mask flags 0 partition 7: name <tclinux_slave>, offset ffffffff, size ffffffff, mask flags 0 partition 4: name <tclinux>, offset ffffffff, size 3800000, mask flags 0 partition 1: name <romfile>, offset ffffffff, size fffffffe, mask flags 0 partition 0: name <bootloader>, offset ffffffff, size fffffffe, mask flags 0 Creating 12 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000000040000 : "bootloader" kworker/u:0 used greatest stack depth: 14856 bytes left 0x000000040000-0x000000080000 : "romfile" 0x000000080000-0x0000001f0e71 : "kernel" mtd: partition "kernel" doesn't end on an erase block -- force read-only 0x0000001f0e71-0x000001170e75 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o nly 0x000000080000-0x000003880000 : "tclinux" 0x000003880000-0x0000039f0f28 : "kernel_slave" mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only 0x0000039f0f28-0x000004970f2c : "rootfs_slave" mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only 0x000003880000-0x000006f60000 : "tclinux_slave" 0x000006f60000-0x000007060000 : "wwan" 0x000007060000-0x000007460000 : "data" 0x000007460000-0x000007560000 : "rom-d" 0x000007560000-0x0000075e0000 : "reservearea" rootfs_slave PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 RT3xxx EHCI/OHCI init. GACT probability NOT on u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1952 buckets, 7808 max) ctnetlink v0.93: registering with nfnetlink. nf_conntrack_rtsp v0.6.21 loading xt_time: kernel timezone is -0000 nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:6. Freeing unused kernel memory: 212k freed uname used greatest stack depth: 14832 bytes left mount used greatest stack depth: 14264 bytes left mknod: dev/hwnat0: File exists mknod: dev/acl0: File exists mknod: dev/ac0: File exists mknod: dev/mtr0: File exists cp used greatest stack depth: 14152 bytes left **************prepare var***************** busybox init and set aff init started: BusyBox v1.20.1 (2021-06-07 21:31:56 CST) chmod: /userfs/profile.cfg: Read-only file system yaffs: dev is 32505865 name is "mtdblock9" rw yaffs: passed flags "tags-ecc-off" mount: mounmount used greatest stack depth: 14056 bytes left ting debugfs on /sys/kernel/debug failed: No such file or directory module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint tcsmux version: tcsmux V1.1.0.0 (Apr 29 2019-17:30:04). tcportbind version: tcportbind V1.1.0.0 (Apr 29 2019-17:30:06). vlantag_drv_init TCSUPPORT_IPV6 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Jun 7 2021-21:48:38). find led.conf error led path:/userfs/led.conf insmod used greatest stack depth: 14008 bytes left tccicmd V1.1.0.0 (Jun 7 2021-21:48:42) SIFMaster 0.1 init Register sifm cmd Reading MT7592 EEPROM from flash reservearea mtd[readflash]:device=reservearea tclen=512 tcoffset=393216 Unlocking reservearea ... Reading from reservearea to /etc/RT30xxEEPROM.bin ... insmod ETH_LAN driver macType = 0 qdma_lan: physical_size is 0x00200000 ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: 4C:C5:3E:4B:76:70 User Internal switch ,type 10 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (8, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0xb000) tcPhyVerLookUp 3852 9451 7512 Ge, [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x1) GE Rxet cal (1)(0)(0)(0x21) GE Rxet cal (2)(0)(0)(0x22) GE Rxet cal (3)(0)(0)(0x23) GE Rxet cal (4)(0)(0)(0x24) GE Rxet cal (5)(0)(0)(0x25) GE Rxet cal (6)(0)(0)(0x26) GE Rxet cal (7)(0)(0)(0x27) GE Rext AnaCal Done! (8)(0x28) GE Rext AnaCal Done! (8)(0x28) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE R50 AnaCal Done! (7) (0x22)(0xa2) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE Tx offset AnaCal Done! (3)(0x3) GE Tx offset AnaCal Done! (6)(0x26) GE Tx offset AnaCal Done! (1)(0x1) GE Tx offset AnaCal Done! (7)(0x27) GE Tx amp AnaCal Done! (pair-0)(0x12)(0x3c10) GE Tx amp AnaCal Done! (19) (0xd) GE Tx amp AnaCal Done! (pair-1)(0x17)(0xc10) GE Tx amp AnaCal Done! (22) (0xa) GE Tx amp AnaCal Done! (pair-2)(0x19)(0xd20) GE Tx amp AnaCal Done! (21) (0xb) GE Tx amp AnaCal Done! (pair-3)(0x21)(0x1020) GE Tx amp AnaCal Done! (18) (0xe) tcPhyVerLookUp 3852 9412 7512 Fe, FE-8 R50 ... (1)(0)(0x21)(0x21) FE-8 R50 AnaCal Done! (2)(0x22) FE-8 Tx offset AnaCal Done! (2)(1)(0x1) FE Tx amp AnaCal Saturation! (45) (ce00)(0)(0)(0) (5) FE-8 Tx amp AnaCal Saturation! (45)(0x3f) FE-8 Tx amp AnaCal Saturation! (45)(0x3f) FE-8 Tx amp AnaCal wait! (1) FE-8 Tx amp AnaCal Done! (9)(0x1b) FE-8 Tx amp AnaCal Done! (3)(0xd) tcPhyVerLookUp 3852 9412 7512 Fe, FE-9 R50 ... (1)(0)(0x21)(0x21) FE-9 R50 ... (2)(0)(0x22)(0x22) FE-9 R50 AnaCal Done! (3)(0x23) FE-9 Tx offset AnaCal Done! (62)(-2)(0x22) FE Tx amp AnaCal Saturation! (45) (ca00)(ce00)(0)(0) (5) FE-9 Tx amp AnaCal Saturation! (45)(0x3f) FE-9 Tx amp AnaCal Saturation! (45)(0x3f) FE-9 Tx amp AnaCal wait! (1) FE-9 Tx amp AnaCal Done! (9)(0x1b) FE-9 Tx amp AnaCal Done! (5)(0xb) tcPhyVerLookUp 3852 9412 7512 Fe, FE-10 R50 ... (1)(0)(0x21)(0x21) FE-10 R50 ... (2)(0)(0x22)(0x22) FE-10 R50 AnaCal Done! (3)(0x23) FE-10 Tx offset AnaCal Done! (61)(-3)(0x23) FE Tx amp AnaCal Saturation! (45) (ca00)(0)(ce00)(0) (5) FE-10 Tx amp AnaCal Saturation! (45)(0x3f) FE-10 Tx amp AnaCal Saturation! (45)(0x3f) FE-10 Tx amp AnaCal wait! (1) FE-10 Tx amp AnaCal Done! (8)(0x1a) FE-10 Tx amp AnaCal Done! (1)(0xf) tcPhyVerLookUp 3852 9412 7512 Fe, FE-11 R50 ... (1)(0)(0x21)(0x21) FE-11 R50 AnaCal Done! (2)(0x22) FE-11 Tx offset AnaCal Done! (64)(0)(0x0) FE Tx amp AnaCal Saturation! (45) (ca00)(0)(0)(ce00) (5) FE-11 Tx amp AnaCal Saturation! (45)(0x3f) FE-11 Tx amp AnaCal Saturation! (45)(0x3f) FE-11 Tx amp AnaCal wait! (1) FE-11 Tx amp AnaCal Done! (8)(0x1a) FE-11 Tx amp AnaCal Done! (1)(0xf) Exec. Successful Exec. Successful Exec. Successful eth0: starting interface. netif_start_queue macType = 0 qdma_wan: physical_size is 0x00100000 Exec. Successful Exec. Successful Exec. Successful install dmt for mt7510 7512_debug: dmt_base_addr : bf900000 ADSL DMT initialization starting Begin AdslTaskInit..... End AdslTaskInit Begin to request IRQ 20 DMT:Succeed to request IRQ 20 Initializing ADSL F/W 5.10.6.0 ...... Initializing ADSL F/W ........ done insmod used greatest stack depth: 13652 bytes left TCSUPPORT_WLAN TCSUPPORT_WLAN_MT7592 register mt_drv mt7603eap.ko zyWlan_evt_init: Enter. mt7603eap.ko zyWlan_evt_init: create socket successfully PCI: Enabling device 0000:01:00.0 (0000 -> 0002) === pAd = c1082000, size = 823712 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc0f80000, csr_addr=0xc0f80000! device_id =0x7603 RtmpChipOpsHook(507): Not support for HIF_MT yet! mt7603_init()--> mt_bcn_buf_init(224): Not support for HIF_MT yet! <--mt7603_init() Mirror/redirect action on insmod: can't insert '/lib/modules/2.6.36/cls_fw.ko': No such file or directory ifconfig: SIOCGIFFLAGS: No such device Ebtables v2.0 registered insmod used greatest stack depth: 13448 bytes left insmod used greatest stack depth: 13156 bytes left HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSzie:80B, foeNum:81 92 IP check use Black List **************lan port init***************** four ports TC3162 hardware watchdog initialized netif_stop_queue device eth0.1 entered promiscuous mode br0: port 1(eth0.1) entering learning state br0: port 1(eth0.1) entering learning state device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entering learning state br0: port 2(eth0.2) entering learning state device eth0.3 entered promiscuous mode br0: port 3(eth0.3) entering learning state br0: port 3(eth0.3) entering learning state device eth0.4 entered promiscuous mode br0: port 4(eth0.4) entering learning state br0: port 4(eth0.4) entering learning state device eth0 is not a slave of br0 eth0: starting interface. netif_start_queue log cicmd 0 (wan dmt2 set largeD 2 ) w used greatest stack depth: 12592 bytes left date: invalid date '010100002012' /etc/init.d/rcS: line 1471: /userfs/bin/wpa_supplicant: not found CO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1 Jan 1 00:00:45 crond[732]: crond: crond (busybox 1.20.1) started, log level 8 START disable Lan and Wan... ln: /dev/log: File exists 1970-01-01 00:00:46 dnsmasq<759>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 23 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr23 successfully dnsmasq: unknown user or group: root unknown user or group: rootFAILED to start up1970-01-01 00:00:47 zcmd<767>, zcmd .c:6329, main(), INFO: Start ZCMD daemon 1970-01-01 00:00:47 zcmd<768>, uitimer.c:95, UITimerProc(), INFO: thread starts zcfg_schema.bin killall: zywifid_run.sh: no process killed The device support wifi! killall: zywifid: no process killed 1970-01-01 00:00:47 zywifid<785>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 40 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr40 successfully zywifid> [ALERT] wifi_module_init:1139: load libzywl_001_ecn.so .......... *reg=0000001c value:68106810 Load NComm TMS Module. Find MTD Device /dev/mtd1 with name romfile. mtd.oobsize 64 mtd.writesize 2048 romfile type ffff romfile size 4294967295 romfile crc 65535 zywifid> [ALERT] main:1274: Check and fix Wifi MAC address...... NComm TMS V6.80 -~-Kernel Module loaded. Please press Enter to activate this console. rm: can't remove '/tmp/wifiScanTime *': No such file or directory MAX Number of Interface Stack is 254 Enter zcmdTr98MapTableInit zcmdTr98ParmAttrNodeBuild: zcmdTr98ParmAttrNodeBuild: obj 69024 5,1,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=1 zcmdTr98ParmAttrNodeBuild: obj 69024 6,1,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=2 zcmdTr98ParmAttrNodeBuild: obj 66588 1,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=3 zcmdTr98ParmAttrNodeBuild: obj 66588 2,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=4 zcmdTr98ParmAttrNodeBuild: obj 66588 3,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=5 zcmdTr98ParmAttrNodeBuild: obj 66744 1,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=6 zcmdTr98ParmAttrNodeBuild: obj 66744 2,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=7 zcmdTr98ParmAttrNodeBuild: obj 66744 3,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=8 zcmdTr98ParmAttrNodeBuild: obj 14976 0,0,0,0,0,0 nSetParmAttr 2 setParmAttrNodeLst Add, n=9 zcmdTr98ParmAttrNodeBuild: obj 17400 0,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=10 mainDhcpPoolInfo[0]= 1 [1 0] mainDhcpPoolInfo[1]= 0 [0 0] mainDhcpPoolInfo[2]= 0 [0 0] mainDhcpPoolInfo[3]= 0 [0 0] mainDhcpPoolInfo[4]= 0 [0 0] mainDhcpPoolInfo[5]= 0 [0 0] mainDhcpPoolInfo[6]= 0 [0 0] mainDhcpPoolInfo[7]= 0 [0 0] mainDhcpPoolInfo[8]= 0 [0 0] mainDhcpPoolInfo[9]= 0 [0 0] mainDhcpPoolInfo[10]= 0 [0 0] mainDhcpPoolInfo[11]= 0 [0 0] mainDhcpPoolInfo[12]= 0 [0 0] mainDhcpPoolInfo[13]= 0 [0 0] mainDhcpPoolInfo[14]= 0 [0 0] mainDhcpPoolInfo[15]= 0 [0 0] zcmdTr98MapTableInit End 1970-01-01 00:00:49 zcmd<767>, zcmd.c:6428, main(), INFO: tr98 map table inited zcmdReleaseTr98ObjParamMapping: no this object mapping zcmdReleaseTr98ObjParamMapping: object 89808 has mapping object zcmdReleaseTr98ObjParamMapping: object index attr zcmdReleaseTr98ObjParamMapping: object index 1 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping with data zcmdTr98MappingGrpQry: obj 89808 1,0,0,0,0,0 queried group 0 zcmdTr98MtRecognizeRDMappingOnRelease: objnum 89808, List obj 89808 =====zcmdTr98MtObjDelete=====seqnum=158 =====zcmdTr181MtObjDelete=====oid=89808 zcmdReleaseTr98ObjParamMapping: object index 2 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 3 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 4 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 5 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 6 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 7 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 8 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 9 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 10 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data 1970-01-01 00:00:49 zcmd<767>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 1 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr1 successfully 1970-01-01 00:00:49 zcmd<807>, zcmd_config_apply.c:1575, zcmdModuleConfigHandleT ask(), INFO: thread starts 1970-01-01 00:00:49 zcmd<807>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 69 bind server socket 4 on /var/lib/.sock/zcfg_sockaddr69 successfully 1970-01-01 00:00:49 zcmd<806>, zcmd_config_apply.c:1657, zcmdConfigApplyTask(), INFO: thread starts 1970-01-01 00:00:49 zcmd<806>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 67 bind server socket 5 on /var/lib/.sock/zcfg_sockaddr67 successfully 1970-01-01 00:00:49 esmd<815>, esmd.c:2289, main(), INFO: ESMD Start ESMD msg server init... 1970-01-01 00:00:49 esmd<815>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 2 bind server socket 0 on /var/lib/.sock/zcfg_sockaddr2 successfully [ESMD] Initial kernel monitor ... kernelFd=6 set user_pid flag to 815 1970-01-01 00:00:49 zcmd<822>, zcmd.c:5752, zcmdActiveZtr69(), INFO: thread star ts FW_WATCHER Start Find MTD Device /dev/mtd8 with name wwan. mtd.oobsize 64 mtd.writesize 2048 Notice: zyUtilUpdateWWANPackage, No WWAN Package in Flash! wwanpackage info: revision is 1.18 1970-01-01 00:00:49 esmd<830>, esmd.c:2151, timer_thread(), INFO: thread starts zyUtilTcpSvrInit 1970-01-01 00:00:49 esmd<829>, esmd.c:1770, _esmd_thread(), INFO: ESMD ground th read starts 1970-01-01 00:00:49 esmd<829>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 66 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr66 successfully 1970-01-01 00:00:49 esmd<828>, esmd.c:1762, _esmd_thread(), INFO: ESMD usr confi g thread starts zcmdBeInit(): DL opening... Initial begui_customization.... Initial bedevice.... insmod: can't insert '/lib/modules/2.6.36/ipt_TRIGGER.ko': No such file or direc tory insmod: can't insert '/lib/modules/2.6.36/xt_connlimit.ko': No such file or dire ctory insmod: can't insert '/lib/modules/2.6.36/xt_time.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_multiport.ko': No such file or dire ctory insmod: can't insert '/lib/modules/2.6.36/xt_pkttype.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_length.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/xt_recent.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/nfnetlink_queue.ko': No such file or d irectory insmod: can't insert '/lib/modules/2.6.36/xt_NFQUEUE.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_mark.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_state.ko': No such file or director y insmod: can't insert '/lib/modules/2.6.36/xt_limit.ko': No such file or director y insmod: can't insert '/lib/modules/2.6.36/xt_mac.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_LOG.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_tcpmss.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/xt_iprange.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_helper.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/iptable_mangle.ko': No such file or di rectory insmod: can't insert '/lib/modules/2.6.36/xt_dscp.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_DSCP.ko': No such file or directory ip6_tables: (C) 2000-2006 Netfilter Core Team insmod: can't insert '/lib/modules/2.6.36/nf_defrag_ipv6.ko': No such file or di rectory Chain MACFILTER already exists. devObj->DeviceSummary = InternetGatewayDevice:1.4[](Baseline:1,EthernetLAN:2,WiF iLAN:1,ADSLWAN:1,ADSL2WAN:1,VDSL2WAN:1,PTMWAN:1,EthernetWAN:1,QoS:1,Time:1,IPPin g:1), Initial bedsl.... G.inp mode ANNEXAIJLM annex auto-switch flag = 0 G.dmt T1.413 G.lite Adsl2 Adsl2plus Vdsl2 is supported!! system_sirial_no_eoc[0]=53 system_sirial_no_eoc[1]=32 system_sirial_no_eoc[2]=30 system_sirial_no_eoc[3]=30 system_sirial_no_eoc[4]=59 system_sirial_no_eoc[5]=34 system_sirial_no_eoc[6]=34 system_sirial_no_eoc[7]=30 system_sirial_no_eoc[8]=38 system_sirial_no_eoc[9]=32 system_sirial_no_eoc[10]=35 system_sirial_no_eoc[11]=31 system_sirial_no_eoc[12]=39 system_sirial_no_eoc[13]=5f system_sirial_no_eoc[14]=31 system_sirial_no_eoc[15]=33 system_sirial_no_eoc[16]=31 system_sirial_no_eoc[17]=32 system_sirial_no_eoc[18]=54 system_sirial_no_eoc[19]=32 system_sirial_no_eoc[20]=30 system_sirial_no_eoc[21]=42 system_sirial_no_eoc[22]=5f system_sirial_no_eoc[23]=41 system_sirial_no_eoc[24]=42 system_sirial_no_eoc[25]=57 system_sirial_no_eoc[26]=4c system_sirial_no_eoc[27]=30 system_sirial_no_eoc[28]=62 system_sirial_no_eoc[29]=34 serial_len=30 Initial beatmlink.... Initial beptmlink.... Initial belog.... killall: tty_log_echo: no process killed killall: mailsend: no process killed killall: syslog-ng: no process killed Set interval time = 60 second br0: port 1(eth0.1) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 4(eth0.4) entering forwarding state Error resolving user; user='root' Initial besysinfo.... Initial beaccount.... mkdir: can't create directory '/var/tmp': File exists run new supervisor pwd algorithm run new supervisor pwd algorithm chmod: /data/zcfg_predef.json: No such file or directory chmod: /data/zcfg_predef.json: No such file or directory Initial bedevinfo.... 1970-01-01 00:00:55 zcmd<821>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendt o /var/lib/.sock/zcfg_sockaddr9, errno = 2(No such file or directory), srcEid = 1, dstEid = 9, type = 273 without reply, oid = 0 1970-01-01 00:00:55 zcmd<821>, zcfg_msg.c:822, zcfg_msg_sendAndGetReply(), ERROR : fail to send message. ret = -5 Initial beethlink.... Initial beethintf.... auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down Initial bewifi_radio.... Initial bewifi_ssid.... Initial bewifi_ap.... 1970-01-01 00:01:10 zcmd<821>, zcmd_config_apply.c:852, zcmdPreSetApply(), ERROR : Get current object fail, oid[59640] eid[1] Initial bebridging.... Initial bebridgingbr.... Initial bebridgePort.... device eth0.1 left promiscuous mode br0: port 1(eth0.1) entering forwarding state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entering forwarding state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entering forwarding state device eth0.4 left promiscuous mode br0: port 4(eth0.4) entering forwarding state device ra0 is not a slave of br0 interface ra1 does not exist! interface ra2 does not exist! interface ra3 does not exist! device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode TX_BCN DESC a730e000 size = 320 RX[0] DESC a67d0000 size = 2048 RX[1] DESC a67d1000 size = 2048 ERROR!!! Your no. of SSIDs( = 1) does not match your BssidNum( = 4)! cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 Key1Str is Invalid key length(1) or Type(0) Key2Str is Invalid key length(1) or Type(0) Key3Str is Invalid key length(1) or Type(0) Key4Str is Invalid key length(1) or Type(0) [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860AP/SingleSKU.dat FW Version:CL173766-A FW Build Date:20170925114906 CmdAddressLenReq:(ret = 0) CmdFwStartReq: override = 1, address = 1048576 CmdStartDLRsp: WiFI FW Download Success AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! @@@ NICReadEEPROMParameters : pAd->FWLoad=0 now bb MainSsid mac 00:aa:bb:01:23:40 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 32 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2577): Not support for HIF_MT yet! MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0 [PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0 AsicSetRalinkBurstMode(4230): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4217): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 00:aa:bb:01:23:40 <==== rt28xx_init, Status=0 @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f jiffies=ffffaa56, POLLING_MODE_DETECT_INTV=300 WiFi Startup Cost (ra0): 3.620s device ra0 entered promiscuous mode ##### mbss_cr_enable, BssId = 1 device ra1 entered promiscuous mode ##### mbss_cr_enable, BssId = 2 device ra2 entered promiscuous mode ##### mbss_cr_enable, BssId = 3 device ra3 entered promiscuous mode Initial bebridgeFilter.... Initial bewifi.... Initial beipiface.... zywifid:Config> [ERROR] zyWifiUpdateLanInfo:468: No wifi interface on module(ECN ). br0: port 8(ra3) entering forwarding state br0: port 8(ra3) entering forwarding state br0: port 7(ra2) entering forwarding state br0: port 7(ra2) entering forwarding state br0: port 6(ra1) entering forwarding state br0: port 6(ra1) entering forwarding state br0: port 5(ra0) entering forwarding state br0: port 5(ra0) entering forwarding state br0: port 4(eth0.4) entering forwarding state br0: port 4(eth0.4) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state zcmdTr98SyncTr98WANConnectNum: obj 67476 seqnum 180 zcmdTr98SyncTr98WANConnectNum: obj 67476 seqnum 180 zcfgBeWanInitIntfMark : Enter zcfgBeWanInitIntfMark: Init IfMark Done !! Initial benatIntf.... modprobe: module nf_nat_ftp not found in modules.dep modprobe: module nf_conntrack_ftp not found in modules.dep modprobe: module nf_nat_ftp not found in modules.dep modprobe: module nf_nat_tftp not found in modules.dep ftp switch turn on modprobe: module nf_nat_sip not found in modules.dep sip switch turn on conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted. conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted. modprobe: module nf_conntrack_rtsp not found in modules.dep modprobe: module nf_nat_rtsp not found in modules.dep rtsp switch turn on modprobe: module nf_nat_pptp not found in modules.dep pptp switch turn on ipsec switch turn on,sw_state= iptables: Bad rule (does a matching rule exist in that chain?). Initial bev4addr.... Initial bev6addr.... Initial bev6prefix.... Initial beusbhost.... Initial beusbintf.... Initial beusbport.... Initial berouter.... Initial berainfo.... Initial bedhcp4_server.... Initial bedhcp4_serverpool.... Initial bedhcp4_serverpool_staticaddr.... Initial bedhcp4_serverpool_option.... Initial bedhcp4_serversubnet.... restart DNSMASQ... killall: dnsmasq: no process killed 1970-01-01 00:01:26 dnsmasq<1541>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr23 successfully Initial bedhcp4_relay.... Initial bedhcp6_server.... Initial bedhcp6_serverpool.... killall: dhcp6s: no process killed restart dhcp6s... restart dhcp6s... Initial bevlanTerm.... Initial bepppiface.... [pppIfaceObj->Username=] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 [pppIfaceObj->Username=Winduser@tellas.gr] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 [pppIfaceObj->Username=Winduser@tellas.gr] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 Initial bepppifaceipcp.... Initial bedhcp4_client.... Initial bedhcp6_client.... 1970-01-01 00:01:26 zcmd<821>, be_dhcp6_client_config_init.c:29, beConfigBoot(), INFO: boot Dhcp6 Client Initial beradvd.... Initial bedns.... Initial bedns_route.... Initial bedns_server.... Initial benat_port_map.... Initial benat_port_trigger.... Initial benat_addr_mapping.... Initial besessCtl.... /bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory /bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directory Initial befirewall.... getL1InterfaceUpstream: 605 USB.Interface.1 Compile time options: IPv6 GNU-getopt no-DBus no-i18nbr0: port 5(ra0) entering f orwarding state no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack ipset auth no-DNSSEC loop-detect inotify restart DNSMASQ... br0: port 6(ra1) entering forwarding state getL1InterfaceUpstream: 605 USB.Interface.1 br0: port 7(ra2) entering forwarding state MTPciPollTxRxEmpty AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 RTMPSetPiggyBack(876): Not support for HIF_MT yet! 1970-01-01 00:01:29 dnsmasq<1648>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr23 successfully RT28xxPciAsicRadioOff(): Not support for HIF_MT yet! RTMPDrvClose call RT28xxPciAsicRadioOff fail !! tx_kickout_fail_count = 0 tx_timeout_fail_count = 0 rx_receive_fail_count = 0 alloc_cmd_msg = 78 free_cmd_msg = 78 br0: port 8(ra3) entering forwarding state Initial betr69.... TX_BCN DESC a730e000 size = 320 RX[0] DESC a67d0000 size = 2048 RX[1] DESC a67d1000 size = 2048 cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=1 APSDCapable[1]=1 APSDCapable[2]=1 APSDCapable[3]=1 APSDCapable[4]=1 APSDCapable[5]=1 APSDCapable[6]=1 APSDCapable[7]=1 APSDCapable[8]=1 APSDCapable[9]=1 APSDCapable[10]=1 APSDCapable[11]=1 APSDCapable[12]=1 APSDCapable[13]=1 APSDCapable[14]=1 APSDCapable[15]=1 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=3, Desired MFPC=1 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=3, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=3, Desired PMFSHA256=0 Initial beddns.... Initial betime.... Initial bediagnostic.... killall: tmsctl: no process killed Initial beschedule.... Initial beparenCtl.... FW Version:CL173766-A FW Build Date:20170925114906 AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! @@@ NICReadEEPROMParameters : pAd->FWLoad=1 now bb MainSsid mac 4c:c5:3e:4b:76:70 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 32 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2577): Not support for HIF_MT yet! RTMPSetPhyMode(): channel out of range, use first ch=0 MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=1, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=2, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=3, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E AsicSetRalinkBurstMode(4230): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4217): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 4c:c5:3e:4b:76:70 <==== rt28xx_init, Status=0 @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f jiffies=ffffb0dd, POLLING_MODE_DETECT_INTV=300 WiFi Startup Cost (ra0): 7.450s br0: port 5(ra0) entering forwarding state br0: port 5(ra0) entering forwarding state Initial beqos.... Initial beqosQueue.... Initial beqosClass.... Initial beqosShaper.... Initial beqosPolicer.... Initial be6rd.... Initial beigmp.... cp: can't stat '/etc/mcpd_igmp.conf': No such file or directory beigmp! /bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent difconfig us ed greatest stack depth: 12344 bytes left irectory [beIgmpCreateCfg](120) Failed. Initial besnmp.... Boot SNMP Initial bemld.... ppe cmd done! cp: can't stat '/etc/mcpd_mld.conf': No such file or directory ppe cmd done! ppe cmd done! cat: can't open '/var/run/ecmh.pid': No such file or directory sh: you need to specify whom to kill ppe cmd done! **** MLD: Interface br0 Snooping Enable!! ppe cmd done! ppe cmd done! ppe cmd done! Initial bevcAutoHunt.... ppe cmd done! Initial bevlanAutoHunt.... Initial beupnp.... Initial bemacfilter.... Initial bemacfilter_whitelist.... Initial beuserinterface.... Initial beremoMgmt.... done ==>Set_Debug_Proc() <==Set_Debug_Proc(RTDebugLevel = 0) mount: mounting devpts on /dev/pts failed: Device or resource busy <Address> <Value> 0xbfb540a4 0x1e000800 device ra0 is already a member of a bridge; can't enslave it to bridge br0. device ra1 is already a member of a bridge; can't enslave it to bridge br0. device ra2 is already a member of a bridge; can't enslave it to bridge br0. device ra3 is already a member of a bridge; can't enslave it to bridge br0. [zywifid] - WlanScheAccess = OFF Initial bechangehosticon.... Initial behosts.... Initial behostshost.... Initial becert.... Initial beportmirror.... Initial bedslite.... Initial beSTBVendorID.... Initial berip.... killall: ripd: no process killed Initial betr64.... Initial bewlan_scheduler.... Initial bewwanbackup.... Initial besamba.... starting smbd. samba start ok wwanbackup info: WWANBACKUP start wwanbackup info: WWANBACKUP_DEBUG is 0 Initial bednsentry.... writing RSA key Initial http with port(443), SSL enable. Initial http with port(80), SSL disable. 1970-01-01 00:01:42 zhttpd<1784>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 15 bind server socket 52 on /var/lib/.sock/zcfg_sockaddr15 successfully Initial bezx.... Initial bedlna.... Initial bevlangroup.... Initial beTFTPServerName.... Initial bemosUserConfig.... /bin/sh: /usr/etc/init.d/init_cdbg.sh: not found /bin/sh: /usr/etc/init.d/init_mosapp.sh: not found Back-end module init finished Initial USB driver... SCSI subsystem initialized turn on ztr69 cwmp_init:1598 : getpid() = 1861 exFAT: Version 1.2.9 zcfgObjectPathListToStruct: clear objectPathList zcfgObjectPathListToStruct: clear objectPathList zcfgFeTr98QueryHandleRoutInit zcfgFeTr181SpvHandleRoutInit zcfgFeTr181QueryHandleRoutInit cwmp_get_acsInfo: reset redirect server resolveSrvUrlName() availableMode=, unknown case! resolveSrvUrlName(): getaddrinfo fail!! ret:-2 1970-01-01 00:01:44 ztr69<1890>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EI D 9 bind server socket 53 on /var/lib/.sock/zcfg_sockaddr9 successfully usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. QFP USB PHY config port 0 u2_slew_rate_calibration FM_OUT value = 143(0x0000008F) SR calibration value = 4 port 1 u2_slew_rate_calibration FM_OUT value = 143(0x0000008F) SR calibration value = 4 USB driver version: 751221.2.20160516 xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1 xhc_mtk xhc_mtk: irq 18, io mem 0x1fb90000 [/sbin/wwan-package-match.sh] VID 1d6b no match, exit hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected /bin/sh: /etc/init.d/mcpd.sh: not found START enable Lan and Wan... TR181 object IP.Interface.1 zyExtRemoteMgmtSrvObjGet : Enter l3fwdObjGet : Enter l3fwdGetDfGwByRtTable: enter, 4 l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!! /bin/sh: zyims.sh: not found [/sbin/wwan-package-match.sh] VID 1d6b no match, exit 1970-01-01 00:01:47 esmd<828>, esmd.c:1724, processRequest(), WARNING: process m sg type = 235 without reply, oid = 0, from EID = 1 by 5481 ms zcmd.c line 5697, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FIN ECONET/zcmd_wrapper.c line 2196, zcmdEnableConfigSave() : enable tr98mapTableSav eFlag and configSaveFlag bePtmLinkStatGet : Enter ============================================================================ UPnP Mapping table Dump: TR98 Object Name : UP nP service Id InternetGatewayDevice.Layer3Forwarding : ur n:upnp-org:serviceId:Layer3Forwarding.1 ============================================================================ l3fwdObjGet : Enter l3fwdGetDfGwByRtTable: enter, 4 l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!! [/sbin/usb-hotplug.sh] add /var/usb/usb1 1970-01-01 00:01:50 zupnp<1952>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EI D 17 bind server socket 13 on /var/lib/.sock/zcfg_sockaddr17 successfully hotplug:beUsbPortSet: USB Port Alias is cpe- hotplug:beUsbPortSet: USB Port Type is Device [/sbin/wwan-package-match.sh] VID 1d6b no match, exit [/sbin/wwan-package-match.sh] VID 1d6b no match, exit [/sbin/usb-hotplug.sh] add /var/usb/usb2 hotplug:beUsbPortSet: USB Port Alias is cpe- hotplug:beUsbPortSet: USB Port Type is Device
-
12-05-24, 14:59 Απάντηση: Zyxel VMG1312-T20B #10
- Εγγραφή
- 04-08-2020
- Μηνύματα
- 75
- Downloads
- 3
- Uploads
- 0
- ISP
- .
Αυτο το unpopulated ειναι wan port 1gbit Αρχικό μήνυμα από finos
Δε προσπάθησα να βγαλω τη ψυκτρα του soc , αφου εχουμε το Part no του..
Βλεπω υπαρχει θεση για (μαλλον) EthWan πορτα οπου ειναι Unpopulated και το jack αλλα και το transformer του ethernet .
Και μια που το ειχα ανοιχτο , πηρα και ενα Boot log , να υπαρχει ...
Spoiler:Κώδικας:KGD IC Xtal:1 DDR2 init. DRAMC init done. Calculate size. DRAM size=128MB Set new TRFC. ddr-800 7512DRAMC V1.2.2 (0) Set SPI Flash Clock to 83 Mhz EN751221 at Thu Jul 9 10:21:26 CST 2020 version 1.1 free bootbase Memory size 128MB Set SPI Flash Clock to 83 Mhz spi_nand_probe: mfr_id=0xef, dev_id=0xaa Dected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success ZyXEL zloader v1.3.2 (07/09/2020 - 10:21:25) Multiboot client version: 2.3 Hit any key to stop autoboot: 0 ==> boot flag = 1 slave tclinux.bin have ZYXEL trx header! from slave Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000 Uncompressing [LZMA] ... done. Linux version 2.6.36 (yenchun@robin-Veriton-X2611G) (gcc version 4.3.6 (OpenWrt GCC 4.3.6 unknown) ) #7 SMP Mon Jun 7 22:11:02 CST 2021 ISPRAM0: PA=00380000,Size=00010000,enabled memsize:128MB EcoNet EN751221 SOC prom init bootconsole [early0] enabled CPU revision is: 00019558 (MIPS 34Kc) Determined physical RAM map: memory: 07fe0000 @ 00020000 (usable) Wasting 1024 bytes for tracking 32 unused pages Zone PFN ranges: Normal 0x00000020 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000020 -> 0x00008000 3 available secondary CPU TC(s) PERCPU: Embedded 7 pages/cpu @81103000 s7264 r8192 d13216 u65536 pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 Kernel command line: es=1 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=0007e46f Readback ErrCtl register=0007e46f nmi base is 8115c200 Memory: 124940k/130944k available (3640k kernel code, 6004k reserved, 729k data, 212k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:64 CPU frequency 700.00 MHz Using 199.968 MHz high precision timer. console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Calibrating delay loop... 465.30 BogoMIPS (lpj=2326528) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 34K sync es set to 1. Config7: 0x80080500 Limit of 4 TCs set TLB of 64 entry pairs shared by 2 VPEs VPE 0: TC 0 1 2, VPE 1: TC 3 IPI buffer pool of 16 buffers CPU revision is: 00019558 ((null)) TC 1 going on-line as CPU 1 CPU revision is: 00019558 ((null)) TC 2 going on-line as CPU 2 CPU revision is: 00019558 ((null)) TC 3 going on-line as CPU 3 Brought up 4 CPUs kworker/u:0 used greatest stack depth: 14864 bytes left NET: Registered protocol family 16 PCIe driver version: 751221.3.20160516 MT7512_pcie_init check pcie link up status: isRC0_LINKUP=1 isRC1_LINKUP=0 registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x2000 0000-0x200fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI bridge to [bus 02-02] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem disabled] pci 0000:00:01.0: bridge window [mem pref disabled] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 mt7512_pcie_fixup: 0x1438 = 20000014 TC3162 hardware watchdog module loaded. USB overcurrent protection. squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 244 io scheduler noop registered (default) ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162 brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6) SPI_NAND_Flash_init: before init, mtx_mode_tog=0xl9, manaul_en=0x1 spi_nand_probe: mfr_id=0xef, dev_id=0xaa Dected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x01000000 at 0x1c000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter NAND device: Manufacturer ID: 0xef, Chip ID: 0xaa (Unknown _SPI_NAND_DEVICE_ID_W 25N01G) nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 calc_bmt_pool_size : need_valid_block_num=0x51, total_block=0x400 bmt pool size: 81 BMT & BBT Init Success parsing <0[bootloader],0[romfile],56M[tclinux],-[tclinux_slave],1M[wwan],4M[data ],1M[rom-d]> partition 10: name <rom-d>, offset ffffffff, size 100000, mask flags 0 partition 9: name <data>, offset ffffffff, size 400000, mask flags 0 partition 8: name <wwan>, offset ffffffff, size 100000, mask flags 0 partition 7: name <tclinux_slave>, offset ffffffff, size ffffffff, mask flags 0 partition 4: name <tclinux>, offset ffffffff, size 3800000, mask flags 0 partition 1: name <romfile>, offset ffffffff, size fffffffe, mask flags 0 partition 0: name <bootloader>, offset ffffffff, size fffffffe, mask flags 0 Creating 12 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000000040000 : "bootloader" kworker/u:0 used greatest stack depth: 14856 bytes left 0x000000040000-0x000000080000 : "romfile" 0x000000080000-0x0000001f0e71 : "kernel" mtd: partition "kernel" doesn't end on an erase block -- force read-only 0x0000001f0e71-0x000001170e75 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o nly 0x000000080000-0x000003880000 : "tclinux" 0x000003880000-0x0000039f0f28 : "kernel_slave" mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only 0x0000039f0f28-0x000004970f2c : "rootfs_slave" mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only 0x000003880000-0x000006f60000 : "tclinux_slave" 0x000006f60000-0x000007060000 : "wwan" 0x000007060000-0x000007460000 : "data" 0x000007460000-0x000007560000 : "rom-d" 0x000007560000-0x0000075e0000 : "reservearea" rootfs_slave PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 RT3xxx EHCI/OHCI init. GACT probability NOT on u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1952 buckets, 7808 max) ctnetlink v0.93: registering with nfnetlink. nf_conntrack_rtsp v0.6.21 loading xt_time: kernel timezone is -0000 nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:6. Freeing unused kernel memory: 212k freed uname used greatest stack depth: 14832 bytes left mount used greatest stack depth: 14264 bytes left mknod: dev/hwnat0: File exists mknod: dev/acl0: File exists mknod: dev/ac0: File exists mknod: dev/mtr0: File exists cp used greatest stack depth: 14152 bytes left **************prepare var***************** busybox init and set aff init started: BusyBox v1.20.1 (2021-06-07 21:31:56 CST) chmod: /userfs/profile.cfg: Read-only file system yaffs: dev is 32505865 name is "mtdblock9" rw yaffs: passed flags "tags-ecc-off" mount: mounmount used greatest stack depth: 14056 bytes left ting debugfs on /sys/kernel/debug failed: No such file or directory module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint tcsmux version: tcsmux V1.1.0.0 (Apr 29 2019-17:30:04). tcportbind version: tcportbind V1.1.0.0 (Apr 29 2019-17:30:06). vlantag_drv_init TCSUPPORT_IPV6 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Jun 7 2021-21:48:38). find led.conf error led path:/userfs/led.conf insmod used greatest stack depth: 14008 bytes left tccicmd V1.1.0.0 (Jun 7 2021-21:48:42) SIFMaster 0.1 init Register sifm cmd Reading MT7592 EEPROM from flash reservearea mtd[readflash]:device=reservearea tclen=512 tcoffset=393216 Unlocking reservearea ... Reading from reservearea to /etc/RT30xxEEPROM.bin ... insmod ETH_LAN driver macType = 0 qdma_lan: physical_size is 0x00200000 ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: 4C:C5:3E:4B:76:70 User Internal switch ,type 10 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (8, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0xb000) tcPhyVerLookUp 3852 9451 7512 Ge, [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x1) GE Rxet cal (1)(0)(0)(0x21) GE Rxet cal (2)(0)(0)(0x22) GE Rxet cal (3)(0)(0)(0x23) GE Rxet cal (4)(0)(0)(0x24) GE Rxet cal (5)(0)(0)(0x25) GE Rxet cal (6)(0)(0)(0x26) GE Rxet cal (7)(0)(0)(0x27) GE Rext AnaCal Done! (8)(0x28) GE Rext AnaCal Done! (8)(0x28) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE R50 AnaCal Done! (7) (0x22)(0xa2) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE Tx offset AnaCal Done! (3)(0x3) GE Tx offset AnaCal Done! (6)(0x26) GE Tx offset AnaCal Done! (1)(0x1) GE Tx offset AnaCal Done! (7)(0x27) GE Tx amp AnaCal Done! (pair-0)(0x12)(0x3c10) GE Tx amp AnaCal Done! (19) (0xd) GE Tx amp AnaCal Done! (pair-1)(0x17)(0xc10) GE Tx amp AnaCal Done! (22) (0xa) GE Tx amp AnaCal Done! (pair-2)(0x19)(0xd20) GE Tx amp AnaCal Done! (21) (0xb) GE Tx amp AnaCal Done! (pair-3)(0x21)(0x1020) GE Tx amp AnaCal Done! (18) (0xe) tcPhyVerLookUp 3852 9412 7512 Fe, FE-8 R50 ... (1)(0)(0x21)(0x21) FE-8 R50 AnaCal Done! (2)(0x22) FE-8 Tx offset AnaCal Done! (2)(1)(0x1) FE Tx amp AnaCal Saturation! (45) (ce00)(0)(0)(0) (5) FE-8 Tx amp AnaCal Saturation! (45)(0x3f) FE-8 Tx amp AnaCal Saturation! (45)(0x3f) FE-8 Tx amp AnaCal wait! (1) FE-8 Tx amp AnaCal Done! (9)(0x1b) FE-8 Tx amp AnaCal Done! (3)(0xd) tcPhyVerLookUp 3852 9412 7512 Fe, FE-9 R50 ... (1)(0)(0x21)(0x21) FE-9 R50 ... (2)(0)(0x22)(0x22) FE-9 R50 AnaCal Done! (3)(0x23) FE-9 Tx offset AnaCal Done! (62)(-2)(0x22) FE Tx amp AnaCal Saturation! (45) (ca00)(ce00)(0)(0) (5) FE-9 Tx amp AnaCal Saturation! (45)(0x3f) FE-9 Tx amp AnaCal Saturation! (45)(0x3f) FE-9 Tx amp AnaCal wait! (1) FE-9 Tx amp AnaCal Done! (9)(0x1b) FE-9 Tx amp AnaCal Done! (5)(0xb) tcPhyVerLookUp 3852 9412 7512 Fe, FE-10 R50 ... (1)(0)(0x21)(0x21) FE-10 R50 ... (2)(0)(0x22)(0x22) FE-10 R50 AnaCal Done! (3)(0x23) FE-10 Tx offset AnaCal Done! (61)(-3)(0x23) FE Tx amp AnaCal Saturation! (45) (ca00)(0)(ce00)(0) (5) FE-10 Tx amp AnaCal Saturation! (45)(0x3f) FE-10 Tx amp AnaCal Saturation! (45)(0x3f) FE-10 Tx amp AnaCal wait! (1) FE-10 Tx amp AnaCal Done! (8)(0x1a) FE-10 Tx amp AnaCal Done! (1)(0xf) tcPhyVerLookUp 3852 9412 7512 Fe, FE-11 R50 ... (1)(0)(0x21)(0x21) FE-11 R50 AnaCal Done! (2)(0x22) FE-11 Tx offset AnaCal Done! (64)(0)(0x0) FE Tx amp AnaCal Saturation! (45) (ca00)(0)(0)(ce00) (5) FE-11 Tx amp AnaCal Saturation! (45)(0x3f) FE-11 Tx amp AnaCal Saturation! (45)(0x3f) FE-11 Tx amp AnaCal wait! (1) FE-11 Tx amp AnaCal Done! (8)(0x1a) FE-11 Tx amp AnaCal Done! (1)(0xf) Exec. Successful Exec. Successful Exec. Successful eth0: starting interface. netif_start_queue macType = 0 qdma_wan: physical_size is 0x00100000 Exec. Successful Exec. Successful Exec. Successful install dmt for mt7510 7512_debug: dmt_base_addr : bf900000 ADSL DMT initialization starting Begin AdslTaskInit..... End AdslTaskInit Begin to request IRQ 20 DMT:Succeed to request IRQ 20 Initializing ADSL F/W 5.10.6.0 ...... Initializing ADSL F/W ........ done insmod used greatest stack depth: 13652 bytes left TCSUPPORT_WLAN TCSUPPORT_WLAN_MT7592 register mt_drv mt7603eap.ko zyWlan_evt_init: Enter. mt7603eap.ko zyWlan_evt_init: create socket successfully PCI: Enabling device 0000:01:00.0 (0000 -> 0002) === pAd = c1082000, size = 823712 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc0f80000, csr_addr=0xc0f80000! device_id =0x7603 RtmpChipOpsHook(507): Not support for HIF_MT yet! mt7603_init()--> mt_bcn_buf_init(224): Not support for HIF_MT yet! <--mt7603_init() Mirror/redirect action on insmod: can't insert '/lib/modules/2.6.36/cls_fw.ko': No such file or directory ifconfig: SIOCGIFFLAGS: No such device Ebtables v2.0 registered insmod used greatest stack depth: 13448 bytes left insmod used greatest stack depth: 13156 bytes left HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSzie:80B, foeNum:81 92 IP check use Black List **************lan port init***************** four ports TC3162 hardware watchdog initialized netif_stop_queue device eth0.1 entered promiscuous mode br0: port 1(eth0.1) entering learning state br0: port 1(eth0.1) entering learning state device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entering learning state br0: port 2(eth0.2) entering learning state device eth0.3 entered promiscuous mode br0: port 3(eth0.3) entering learning state br0: port 3(eth0.3) entering learning state device eth0.4 entered promiscuous mode br0: port 4(eth0.4) entering learning state br0: port 4(eth0.4) entering learning state device eth0 is not a slave of br0 eth0: starting interface. netif_start_queue log cicmd 0 (wan dmt2 set largeD 2 ) w used greatest stack depth: 12592 bytes left date: invalid date '010100002012' /etc/init.d/rcS: line 1471: /userfs/bin/wpa_supplicant: not found CO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1 Jan 1 00:00:45 crond[732]: crond: crond (busybox 1.20.1) started, log level 8 START disable Lan and Wan... ln: /dev/log: File exists 1970-01-01 00:00:46 dnsmasq<759>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 23 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr23 successfully dnsmasq: unknown user or group: root unknown user or group: rootFAILED to start up1970-01-01 00:00:47 zcmd<767>, zcmd .c:6329, main(), INFO: Start ZCMD daemon 1970-01-01 00:00:47 zcmd<768>, uitimer.c:95, UITimerProc(), INFO: thread starts zcfg_schema.bin killall: zywifid_run.sh: no process killed The device support wifi! killall: zywifid: no process killed 1970-01-01 00:00:47 zywifid<785>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 40 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr40 successfully zywifid> [ALERT] wifi_module_init:1139: load libzywl_001_ecn.so .......... *reg=0000001c value:68106810 Load NComm TMS Module. Find MTD Device /dev/mtd1 with name romfile. mtd.oobsize 64 mtd.writesize 2048 romfile type ffff romfile size 4294967295 romfile crc 65535 zywifid> [ALERT] main:1274: Check and fix Wifi MAC address...... NComm TMS V6.80 -~-Kernel Module loaded. Please press Enter to activate this console. rm: can't remove '/tmp/wifiScanTime *': No such file or directory MAX Number of Interface Stack is 254 Enter zcmdTr98MapTableInit zcmdTr98ParmAttrNodeBuild: zcmdTr98ParmAttrNodeBuild: obj 69024 5,1,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=1 zcmdTr98ParmAttrNodeBuild: obj 69024 6,1,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=2 zcmdTr98ParmAttrNodeBuild: obj 66588 1,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=3 zcmdTr98ParmAttrNodeBuild: obj 66588 2,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=4 zcmdTr98ParmAttrNodeBuild: obj 66588 3,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=5 zcmdTr98ParmAttrNodeBuild: obj 66744 1,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=6 zcmdTr98ParmAttrNodeBuild: obj 66744 2,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=7 zcmdTr98ParmAttrNodeBuild: obj 66744 3,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=8 zcmdTr98ParmAttrNodeBuild: obj 14976 0,0,0,0,0,0 nSetParmAttr 2 setParmAttrNodeLst Add, n=9 zcmdTr98ParmAttrNodeBuild: obj 17400 0,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=10 mainDhcpPoolInfo[0]= 1 [1 0] mainDhcpPoolInfo[1]= 0 [0 0] mainDhcpPoolInfo[2]= 0 [0 0] mainDhcpPoolInfo[3]= 0 [0 0] mainDhcpPoolInfo[4]= 0 [0 0] mainDhcpPoolInfo[5]= 0 [0 0] mainDhcpPoolInfo[6]= 0 [0 0] mainDhcpPoolInfo[7]= 0 [0 0] mainDhcpPoolInfo[8]= 0 [0 0] mainDhcpPoolInfo[9]= 0 [0 0] mainDhcpPoolInfo[10]= 0 [0 0] mainDhcpPoolInfo[11]= 0 [0 0] mainDhcpPoolInfo[12]= 0 [0 0] mainDhcpPoolInfo[13]= 0 [0 0] mainDhcpPoolInfo[14]= 0 [0 0] mainDhcpPoolInfo[15]= 0 [0 0] zcmdTr98MapTableInit End 1970-01-01 00:00:49 zcmd<767>, zcmd.c:6428, main(), INFO: tr98 map table inited zcmdReleaseTr98ObjParamMapping: no this object mapping zcmdReleaseTr98ObjParamMapping: object 89808 has mapping object zcmdReleaseTr98ObjParamMapping: object index attr zcmdReleaseTr98ObjParamMapping: object index 1 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping with data zcmdTr98MappingGrpQry: obj 89808 1,0,0,0,0,0 queried group 0 zcmdTr98MtRecognizeRDMappingOnRelease: objnum 89808, List obj 89808 =====zcmdTr98MtObjDelete=====seqnum=158 =====zcmdTr181MtObjDelete=====oid=89808 zcmdReleaseTr98ObjParamMapping: object index 2 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 3 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 4 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 5 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 6 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 7 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 8 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 9 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 10 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data 1970-01-01 00:00:49 zcmd<767>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 1 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr1 successfully 1970-01-01 00:00:49 zcmd<807>, zcmd_config_apply.c:1575, zcmdModuleConfigHandleT ask(), INFO: thread starts 1970-01-01 00:00:49 zcmd<807>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 69 bind server socket 4 on /var/lib/.sock/zcfg_sockaddr69 successfully 1970-01-01 00:00:49 zcmd<806>, zcmd_config_apply.c:1657, zcmdConfigApplyTask(), INFO: thread starts 1970-01-01 00:00:49 zcmd<806>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 67 bind server socket 5 on /var/lib/.sock/zcfg_sockaddr67 successfully 1970-01-01 00:00:49 esmd<815>, esmd.c:2289, main(), INFO: ESMD Start ESMD msg server init... 1970-01-01 00:00:49 esmd<815>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 2 bind server socket 0 on /var/lib/.sock/zcfg_sockaddr2 successfully [ESMD] Initial kernel monitor ... kernelFd=6 set user_pid flag to 815 1970-01-01 00:00:49 zcmd<822>, zcmd.c:5752, zcmdActiveZtr69(), INFO: thread star ts FW_WATCHER Start Find MTD Device /dev/mtd8 with name wwan. mtd.oobsize 64 mtd.writesize 2048 Notice: zyUtilUpdateWWANPackage, No WWAN Package in Flash! wwanpackage info: revision is 1.18 1970-01-01 00:00:49 esmd<830>, esmd.c:2151, timer_thread(), INFO: thread starts zyUtilTcpSvrInit 1970-01-01 00:00:49 esmd<829>, esmd.c:1770, _esmd_thread(), INFO: ESMD ground th read starts 1970-01-01 00:00:49 esmd<829>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 66 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr66 successfully 1970-01-01 00:00:49 esmd<828>, esmd.c:1762, _esmd_thread(), INFO: ESMD usr confi g thread starts zcmdBeInit(): DL opening... Initial begui_customization.... Initial bedevice.... insmod: can't insert '/lib/modules/2.6.36/ipt_TRIGGER.ko': No such file or direc tory insmod: can't insert '/lib/modules/2.6.36/xt_connlimit.ko': No such file or dire ctory insmod: can't insert '/lib/modules/2.6.36/xt_time.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_multiport.ko': No such file or dire ctory insmod: can't insert '/lib/modules/2.6.36/xt_pkttype.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_length.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/xt_recent.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/nfnetlink_queue.ko': No such file or d irectory insmod: can't insert '/lib/modules/2.6.36/xt_NFQUEUE.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_mark.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_state.ko': No such file or director y insmod: can't insert '/lib/modules/2.6.36/xt_limit.ko': No such file or director y insmod: can't insert '/lib/modules/2.6.36/xt_mac.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_LOG.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_tcpmss.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/xt_iprange.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_helper.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/iptable_mangle.ko': No such file or di rectory insmod: can't insert '/lib/modules/2.6.36/xt_dscp.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_DSCP.ko': No such file or directory ip6_tables: (C) 2000-2006 Netfilter Core Team insmod: can't insert '/lib/modules/2.6.36/nf_defrag_ipv6.ko': No such file or di rectory Chain MACFILTER already exists. devObj->DeviceSummary = InternetGatewayDevice:1.4[](Baseline:1,EthernetLAN:2,WiF iLAN:1,ADSLWAN:1,ADSL2WAN:1,VDSL2WAN:1,PTMWAN:1,EthernetWAN:1,QoS:1,Time:1,IPPin g:1), Initial bedsl.... G.inp mode ANNEXAIJLM annex auto-switch flag = 0 G.dmt T1.413 G.lite Adsl2 Adsl2plus Vdsl2 is supported!! system_sirial_no_eoc[0]=53 system_sirial_no_eoc[1]=32 system_sirial_no_eoc[2]=30 system_sirial_no_eoc[3]=30 system_sirial_no_eoc[4]=59 system_sirial_no_eoc[5]=34 system_sirial_no_eoc[6]=34 system_sirial_no_eoc[7]=30 system_sirial_no_eoc[8]=38 system_sirial_no_eoc[9]=32 system_sirial_no_eoc[10]=35 system_sirial_no_eoc[11]=31 system_sirial_no_eoc[12]=39 system_sirial_no_eoc[13]=5f system_sirial_no_eoc[14]=31 system_sirial_no_eoc[15]=33 system_sirial_no_eoc[16]=31 system_sirial_no_eoc[17]=32 system_sirial_no_eoc[18]=54 system_sirial_no_eoc[19]=32 system_sirial_no_eoc[20]=30 system_sirial_no_eoc[21]=42 system_sirial_no_eoc[22]=5f system_sirial_no_eoc[23]=41 system_sirial_no_eoc[24]=42 system_sirial_no_eoc[25]=57 system_sirial_no_eoc[26]=4c system_sirial_no_eoc[27]=30 system_sirial_no_eoc[28]=62 system_sirial_no_eoc[29]=34 serial_len=30 Initial beatmlink.... Initial beptmlink.... Initial belog.... killall: tty_log_echo: no process killed killall: mailsend: no process killed killall: syslog-ng: no process killed Set interval time = 60 second br0: port 1(eth0.1) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 4(eth0.4) entering forwarding state Error resolving user; user='root' Initial besysinfo.... Initial beaccount.... mkdir: can't create directory '/var/tmp': File exists run new supervisor pwd algorithm run new supervisor pwd algorithm chmod: /data/zcfg_predef.json: No such file or directory chmod: /data/zcfg_predef.json: No such file or directory Initial bedevinfo.... 1970-01-01 00:00:55 zcmd<821>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendt o /var/lib/.sock/zcfg_sockaddr9, errno = 2(No such file or directory), srcEid = 1, dstEid = 9, type = 273 without reply, oid = 0 1970-01-01 00:00:55 zcmd<821>, zcfg_msg.c:822, zcfg_msg_sendAndGetReply(), ERROR : fail to send message. ret = -5 Initial beethlink.... Initial beethintf.... auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down Initial bewifi_radio.... Initial bewifi_ssid.... Initial bewifi_ap.... 1970-01-01 00:01:10 zcmd<821>, zcmd_config_apply.c:852, zcmdPreSetApply(), ERROR : Get current object fail, oid[59640] eid[1] Initial bebridging.... Initial bebridgingbr.... Initial bebridgePort.... device eth0.1 left promiscuous mode br0: port 1(eth0.1) entering forwarding state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entering forwarding state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entering forwarding state device eth0.4 left promiscuous mode br0: port 4(eth0.4) entering forwarding state device ra0 is not a slave of br0 interface ra1 does not exist! interface ra2 does not exist! interface ra3 does not exist! device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode TX_BCN DESC a730e000 size = 320 RX[0] DESC a67d0000 size = 2048 RX[1] DESC a67d1000 size = 2048 ERROR!!! Your no. of SSIDs( = 1) does not match your BssidNum( = 4)! cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 Key1Str is Invalid key length(1) or Type(0) Key2Str is Invalid key length(1) or Type(0) Key3Str is Invalid key length(1) or Type(0) Key4Str is Invalid key length(1) or Type(0) [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860AP/SingleSKU.dat FW Version:CL173766-A FW Build Date:20170925114906 CmdAddressLenReq:(ret = 0) CmdFwStartReq: override = 1, address = 1048576 CmdStartDLRsp: WiFI FW Download Success AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! @@@ NICReadEEPROMParameters : pAd->FWLoad=0 now bb MainSsid mac 00:aa:bb:01:23:40 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 32 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2577): Not support for HIF_MT yet! MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0 [PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0 AsicSetRalinkBurstMode(4230): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4217): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 00:aa:bb:01:23:40 <==== rt28xx_init, Status=0 @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f jiffies=ffffaa56, POLLING_MODE_DETECT_INTV=300 WiFi Startup Cost (ra0): 3.620s device ra0 entered promiscuous mode ##### mbss_cr_enable, BssId = 1 device ra1 entered promiscuous mode ##### mbss_cr_enable, BssId = 2 device ra2 entered promiscuous mode ##### mbss_cr_enable, BssId = 3 device ra3 entered promiscuous mode Initial bebridgeFilter.... Initial bewifi.... Initial beipiface.... zywifid:Config> [ERROR] zyWifiUpdateLanInfo:468: No wifi interface on module(ECN ). br0: port 8(ra3) entering forwarding state br0: port 8(ra3) entering forwarding state br0: port 7(ra2) entering forwarding state br0: port 7(ra2) entering forwarding state br0: port 6(ra1) entering forwarding state br0: port 6(ra1) entering forwarding state br0: port 5(ra0) entering forwarding state br0: port 5(ra0) entering forwarding state br0: port 4(eth0.4) entering forwarding state br0: port 4(eth0.4) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state zcmdTr98SyncTr98WANConnectNum: obj 67476 seqnum 180 zcmdTr98SyncTr98WANConnectNum: obj 67476 seqnum 180 zcfgBeWanInitIntfMark : Enter zcfgBeWanInitIntfMark: Init IfMark Done !! Initial benatIntf.... modprobe: module nf_nat_ftp not found in modules.dep modprobe: module nf_conntrack_ftp not found in modules.dep modprobe: module nf_nat_ftp not found in modules.dep modprobe: module nf_nat_tftp not found in modules.dep ftp switch turn on modprobe: module nf_nat_sip not found in modules.dep sip switch turn on conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted. conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted. modprobe: module nf_conntrack_rtsp not found in modules.dep modprobe: module nf_nat_rtsp not found in modules.dep rtsp switch turn on modprobe: module nf_nat_pptp not found in modules.dep pptp switch turn on ipsec switch turn on,sw_state= iptables: Bad rule (does a matching rule exist in that chain?). Initial bev4addr.... Initial bev6addr.... Initial bev6prefix.... Initial beusbhost.... Initial beusbintf.... Initial beusbport.... Initial berouter.... Initial berainfo.... Initial bedhcp4_server.... Initial bedhcp4_serverpool.... Initial bedhcp4_serverpool_staticaddr.... Initial bedhcp4_serverpool_option.... Initial bedhcp4_serversubnet.... restart DNSMASQ... killall: dnsmasq: no process killed 1970-01-01 00:01:26 dnsmasq<1541>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr23 successfully Initial bedhcp4_relay.... Initial bedhcp6_server.... Initial bedhcp6_serverpool.... killall: dhcp6s: no process killed restart dhcp6s... restart dhcp6s... Initial bevlanTerm.... Initial bepppiface.... [pppIfaceObj->Username=] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 [pppIfaceObj->Username=Winduser@tellas.gr] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 [pppIfaceObj->Username=Winduser@tellas.gr] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 Initial bepppifaceipcp.... Initial bedhcp4_client.... Initial bedhcp6_client.... 1970-01-01 00:01:26 zcmd<821>, be_dhcp6_client_config_init.c:29, beConfigBoot(), INFO: boot Dhcp6 Client Initial beradvd.... Initial bedns.... Initial bedns_route.... Initial bedns_server.... Initial benat_port_map.... Initial benat_port_trigger.... Initial benat_addr_mapping.... Initial besessCtl.... /bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory /bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directory Initial befirewall.... getL1InterfaceUpstream: 605 USB.Interface.1 Compile time options: IPv6 GNU-getopt no-DBus no-i18nbr0: port 5(ra0) entering f orwarding state no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack ipset auth no-DNSSEC loop-detect inotify restart DNSMASQ... br0: port 6(ra1) entering forwarding state getL1InterfaceUpstream: 605 USB.Interface.1 br0: port 7(ra2) entering forwarding state MTPciPollTxRxEmpty AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 RTMPSetPiggyBack(876): Not support for HIF_MT yet! 1970-01-01 00:01:29 dnsmasq<1648>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr23 successfully RT28xxPciAsicRadioOff(): Not support for HIF_MT yet! RTMPDrvClose call RT28xxPciAsicRadioOff fail !! tx_kickout_fail_count = 0 tx_timeout_fail_count = 0 rx_receive_fail_count = 0 alloc_cmd_msg = 78 free_cmd_msg = 78 br0: port 8(ra3) entering forwarding state Initial betr69.... TX_BCN DESC a730e000 size = 320 RX[0] DESC a67d0000 size = 2048 RX[1] DESC a67d1000 size = 2048 cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=1 APSDCapable[1]=1 APSDCapable[2]=1 APSDCapable[3]=1 APSDCapable[4]=1 APSDCapable[5]=1 APSDCapable[6]=1 APSDCapable[7]=1 APSDCapable[8]=1 APSDCapable[9]=1 APSDCapable[10]=1 APSDCapable[11]=1 APSDCapable[12]=1 APSDCapable[13]=1 APSDCapable[14]=1 APSDCapable[15]=1 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=3, Desired MFPC=1 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=3, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=3, Desired PMFSHA256=0 Initial beddns.... Initial betime.... Initial bediagnostic.... killall: tmsctl: no process killed Initial beschedule.... Initial beparenCtl.... FW Version:CL173766-A FW Build Date:20170925114906 AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! @@@ NICReadEEPROMParameters : pAd->FWLoad=1 now bb MainSsid mac 4c:c5:3e:4b:76:70 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 32 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2577): Not support for HIF_MT yet! RTMPSetPhyMode(): channel out of range, use first ch=0 MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=1, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=2, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=3, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E AsicSetRalinkBurstMode(4230): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4217): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 4c:c5:3e:4b:76:70 <==== rt28xx_init, Status=0 @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f jiffies=ffffb0dd, POLLING_MODE_DETECT_INTV=300 WiFi Startup Cost (ra0): 7.450s br0: port 5(ra0) entering forwarding state br0: port 5(ra0) entering forwarding state Initial beqos.... Initial beqosQueue.... Initial beqosClass.... Initial beqosShaper.... Initial beqosPolicer.... Initial be6rd.... Initial beigmp.... cp: can't stat '/etc/mcpd_igmp.conf': No such file or directory beigmp! /bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent difconfig us ed greatest stack depth: 12344 bytes left irectory [beIgmpCreateCfg](120) Failed. Initial besnmp.... Boot SNMP Initial bemld.... ppe cmd done! cp: can't stat '/etc/mcpd_mld.conf': No such file or directory ppe cmd done! ppe cmd done! cat: can't open '/var/run/ecmh.pid': No such file or directory sh: you need to specify whom to kill ppe cmd done! **** MLD: Interface br0 Snooping Enable!! ppe cmd done! ppe cmd done! ppe cmd done! Initial bevcAutoHunt.... ppe cmd done! Initial bevlanAutoHunt.... Initial beupnp.... Initial bemacfilter.... Initial bemacfilter_whitelist.... Initial beuserinterface.... Initial beremoMgmt.... done ==>Set_Debug_Proc() <==Set_Debug_Proc(RTDebugLevel = 0) mount: mounting devpts on /dev/pts failed: Device or resource busy <Address> <Value> 0xbfb540a4 0x1e000800 device ra0 is already a member of a bridge; can't enslave it to bridge br0. device ra1 is already a member of a bridge; can't enslave it to bridge br0. device ra2 is already a member of a bridge; can't enslave it to bridge br0. device ra3 is already a member of a bridge; can't enslave it to bridge br0. [zywifid] - WlanScheAccess = OFF Initial bechangehosticon.... Initial behosts.... Initial behostshost.... Initial becert.... Initial beportmirror.... Initial bedslite.... Initial beSTBVendorID.... Initial berip.... killall: ripd: no process killed Initial betr64.... Initial bewlan_scheduler.... Initial bewwanbackup.... Initial besamba.... starting smbd. samba start ok wwanbackup info: WWANBACKUP start wwanbackup info: WWANBACKUP_DEBUG is 0 Initial bednsentry.... writing RSA key Initial http with port(443), SSL enable. Initial http with port(80), SSL disable. 1970-01-01 00:01:42 zhttpd<1784>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 15 bind server socket 52 on /var/lib/.sock/zcfg_sockaddr15 successfully Initial bezx.... Initial bedlna.... Initial bevlangroup.... Initial beTFTPServerName.... Initial bemosUserConfig.... /bin/sh: /usr/etc/init.d/init_cdbg.sh: not found /bin/sh: /usr/etc/init.d/init_mosapp.sh: not found Back-end module init finished Initial USB driver... SCSI subsystem initialized turn on ztr69 cwmp_init:1598 : getpid() = 1861 exFAT: Version 1.2.9 zcfgObjectPathListToStruct: clear objectPathList zcfgObjectPathListToStruct: clear objectPathList zcfgFeTr98QueryHandleRoutInit zcfgFeTr181SpvHandleRoutInit zcfgFeTr181QueryHandleRoutInit cwmp_get_acsInfo: reset redirect server resolveSrvUrlName() availableMode=, unknown case! resolveSrvUrlName(): getaddrinfo fail!! ret:-2 1970-01-01 00:01:44 ztr69<1890>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EI D 9 bind server socket 53 on /var/lib/.sock/zcfg_sockaddr9 successfully usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. QFP USB PHY config port 0 u2_slew_rate_calibration FM_OUT value = 143(0x0000008F) SR calibration value = 4 port 1 u2_slew_rate_calibration FM_OUT value = 143(0x0000008F) SR calibration value = 4 USB driver version: 751221.2.20160516 xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1 xhc_mtk xhc_mtk: irq 18, io mem 0x1fb90000 [/sbin/wwan-package-match.sh] VID 1d6b no match, exit hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected /bin/sh: /etc/init.d/mcpd.sh: not found START enable Lan and Wan... TR181 object IP.Interface.1 zyExtRemoteMgmtSrvObjGet : Enter l3fwdObjGet : Enter l3fwdGetDfGwByRtTable: enter, 4 l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!! /bin/sh: zyims.sh: not found [/sbin/wwan-package-match.sh] VID 1d6b no match, exit 1970-01-01 00:01:47 esmd<828>, esmd.c:1724, processRequest(), WARNING: process m sg type = 235 without reply, oid = 0, from EID = 1 by 5481 ms zcmd.c line 5697, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FIN ECONET/zcmd_wrapper.c line 2196, zcmdEnableConfigSave() : enable tr98mapTableSav eFlag and configSaveFlag bePtmLinkStatGet : Enter ============================================================================ UPnP Mapping table Dump: TR98 Object Name : UP nP service Id InternetGatewayDevice.Layer3Forwarding : ur n:upnp-org:serviceId:Layer3Forwarding.1 ============================================================================ l3fwdObjGet : Enter l3fwdGetDfGwByRtTable: enter, 4 l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!! [/sbin/usb-hotplug.sh] add /var/usb/usb1 1970-01-01 00:01:50 zupnp<1952>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EI D 17 bind server socket 13 on /var/lib/.sock/zcfg_sockaddr17 successfully hotplug:beUsbPortSet: USB Port Alias is cpe- hotplug:beUsbPortSet: USB Port Type is Device [/sbin/wwan-package-match.sh] VID 1d6b no match, exit [/sbin/wwan-package-match.sh] VID 1d6b no match, exit [/sbin/usb-hotplug.sh] add /var/usb/usb2 hotplug:beUsbPortSet: USB Port Alias is cpe- hotplug:beUsbPortSet: USB Port Type is Device
- - - Updated - - -
Μπορει να δουλευει και η τηλεφωνια με το BYOD με το option 61 οπως εγγραψα εδω με pbx η voip soft/hard phone https://www.adslgr.com/forum/threads...Authentication
-
13-05-24, 17:30 Απάντηση: Zyxel VMG1312-T20B #11
- Εγγραφή
- 07-07-2014
- Περιοχή
- Θεσσαλονίκη
- Μηνύματα
- 949
- Downloads
- 4
- Uploads
- 0
- Τύπος
- VDSL2
- Ταχύτητα
- 112640/11255 D/U
- ISP
- ΟΤΕ Conn-x
- DSLAM
- ΟΤΕ - ΑΠ. ΠΑΥΛΟΣ
- Router
- pfsense & TG789vac rooted
- SNR / Attn
- 15.4(dB) / 11(dB)
- Path Level
- Interleaved
κι ομως ! Αρχικό μήνυμα από notupus
Αυτο το unpopulated ειναι wan port 1gbit
- - - Updated - - -
Δεν ειναι 1Gbit !
ουτε η Unpopulated wan ΑΛΛΑ ΟΥΤΕ και οι LAN πορτες !!
Τα περι Τηλεφωνιας ομως δε καταλαβα που κολλανε εδω ...Μπορει να δουλευει και η τηλεφωνια με το BYOD με το option 61 οπως εγγραψα εδω με pbx η voip soft/hard phone https://www.adslgr.com/forum/threads...Authentication
-
13-05-24, 17:46 Απάντηση: Zyxel VMG1312-T20B #12
- Εγγραφή
- 04-08-2020
- Μηνύματα
- 75
- Downloads
- 3
- Uploads
- 0
- ISP
- .
Οι lan σιγουρα δεν ειναι αλλα η unpopulated wan? ειναι, εχει και τα 8 pin συνδεμενα με το unpolulated τρανσφορμερακι. Ενδιαφερον θα ειχε αν περνει το firmware απο το webui
Τα περι τηλεφωνιας πιθανων να εφαρμοζονται και σε αυτο το ρουτερ οποτε αφου υπαρχει thread ας υπαρχει και σχετικος συνδεσμος.
-
17-05-24, 22:26 Απάντηση: Zyxel VMG1312-T20B #13
- Εγγραφή
- 17-02-2024
- Μηνύματα
- 18
- Downloads
- 0
- Uploads
- 0
- ISP
- ΟΤΕ Conn-x
Αν δεις ότι δεν το χρειάζεσαι και θελήσεις να το πετάξεις, με ενδιαφέρει για να μεταμοσχεύσω το flash chip στο 8623-t50b του οποίου μάλλον το έψησα στον προγραμματιστή. :P Αρχικό μήνυμα από finos
Δε προσπάθησα να βγαλω τη ψυκτρα του soc , αφου εχουμε το Part no του..
Βλεπω υπαρχει θεση για (μαλλον) EthWan πορτα οπου ειναι Unpopulated και το jack αλλα και το transformer του ethernet .
Και μια που το ειχα ανοιχτο , πηρα και ενα Boot log , να υπαρχει ...
Spoiler:Κώδικας:KGD IC Xtal:1 DDR2 init. DRAMC init done. Calculate size. DRAM size=128MB Set new TRFC. ddr-800 7512DRAMC V1.2.2 (0) Set SPI Flash Clock to 83 Mhz EN751221 at Thu Jul 9 10:21:26 CST 2020 version 1.1 free bootbase Memory size 128MB Set SPI Flash Clock to 83 Mhz spi_nand_probe: mfr_id=0xef, dev_id=0xaa Dected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success ZyXEL zloader v1.3.2 (07/09/2020 - 10:21:25) Multiboot client version: 2.3 Hit any key to stop autoboot: 0 ==> boot flag = 1 slave tclinux.bin have ZYXEL trx header! from slave Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000 Uncompressing [LZMA] ... done. Linux version 2.6.36 (yenchun@robin-Veriton-X2611G) (gcc version 4.3.6 (OpenWrt GCC 4.3.6 unknown) ) #7 SMP Mon Jun 7 22:11:02 CST 2021 ISPRAM0: PA=00380000,Size=00010000,enabled memsize:128MB EcoNet EN751221 SOC prom init bootconsole [early0] enabled CPU revision is: 00019558 (MIPS 34Kc) Determined physical RAM map: memory: 07fe0000 @ 00020000 (usable) Wasting 1024 bytes for tracking 32 unused pages Zone PFN ranges: Normal 0x00000020 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000020 -> 0x00008000 3 available secondary CPU TC(s) PERCPU: Embedded 7 pages/cpu @81103000 s7264 r8192 d13216 u65536 pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 Kernel command line: es=1 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=0007e46f Readback ErrCtl register=0007e46f nmi base is 8115c200 Memory: 124940k/130944k available (3640k kernel code, 6004k reserved, 729k data, 212k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:64 CPU frequency 700.00 MHz Using 199.968 MHz high precision timer. console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Calibrating delay loop... 465.30 BogoMIPS (lpj=2326528) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 34K sync es set to 1. Config7: 0x80080500 Limit of 4 TCs set TLB of 64 entry pairs shared by 2 VPEs VPE 0: TC 0 1 2, VPE 1: TC 3 IPI buffer pool of 16 buffers CPU revision is: 00019558 ((null)) TC 1 going on-line as CPU 1 CPU revision is: 00019558 ((null)) TC 2 going on-line as CPU 2 CPU revision is: 00019558 ((null)) TC 3 going on-line as CPU 3 Brought up 4 CPUs kworker/u:0 used greatest stack depth: 14864 bytes left NET: Registered protocol family 16 PCIe driver version: 751221.3.20160516 MT7512_pcie_init check pcie link up status: isRC0_LINKUP=1 isRC1_LINKUP=0 registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x2000 0000-0x200fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI bridge to [bus 02-02] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem disabled] pci 0000:00:01.0: bridge window [mem pref disabled] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 mt7512_pcie_fixup: 0x1438 = 20000014 TC3162 hardware watchdog module loaded. USB overcurrent protection. squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 244 io scheduler noop registered (default) ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162 brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6) SPI_NAND_Flash_init: before init, mtx_mode_tog=0xl9, manaul_en=0x1 spi_nand_probe: mfr_id=0xef, dev_id=0xaa Dected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x01000000 at 0x1c000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter NAND device: Manufacturer ID: 0xef, Chip ID: 0xaa (Unknown _SPI_NAND_DEVICE_ID_W 25N01G) nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 calc_bmt_pool_size : need_valid_block_num=0x51, total_block=0x400 bmt pool size: 81 BMT & BBT Init Success parsing <0[bootloader],0[romfile],56M[tclinux],-[tclinux_slave],1M[wwan],4M[data ],1M[rom-d]> partition 10: name <rom-d>, offset ffffffff, size 100000, mask flags 0 partition 9: name <data>, offset ffffffff, size 400000, mask flags 0 partition 8: name <wwan>, offset ffffffff, size 100000, mask flags 0 partition 7: name <tclinux_slave>, offset ffffffff, size ffffffff, mask flags 0 partition 4: name <tclinux>, offset ffffffff, size 3800000, mask flags 0 partition 1: name <romfile>, offset ffffffff, size fffffffe, mask flags 0 partition 0: name <bootloader>, offset ffffffff, size fffffffe, mask flags 0 Creating 12 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000000040000 : "bootloader" kworker/u:0 used greatest stack depth: 14856 bytes left 0x000000040000-0x000000080000 : "romfile" 0x000000080000-0x0000001f0e71 : "kernel" mtd: partition "kernel" doesn't end on an erase block -- force read-only 0x0000001f0e71-0x000001170e75 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o nly 0x000000080000-0x000003880000 : "tclinux" 0x000003880000-0x0000039f0f28 : "kernel_slave" mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only 0x0000039f0f28-0x000004970f2c : "rootfs_slave" mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only 0x000003880000-0x000006f60000 : "tclinux_slave" 0x000006f60000-0x000007060000 : "wwan" 0x000007060000-0x000007460000 : "data" 0x000007460000-0x000007560000 : "rom-d" 0x000007560000-0x0000075e0000 : "reservearea" rootfs_slave PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 RT3xxx EHCI/OHCI init. GACT probability NOT on u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1952 buckets, 7808 max) ctnetlink v0.93: registering with nfnetlink. nf_conntrack_rtsp v0.6.21 loading xt_time: kernel timezone is -0000 nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:6. Freeing unused kernel memory: 212k freed uname used greatest stack depth: 14832 bytes left mount used greatest stack depth: 14264 bytes left mknod: dev/hwnat0: File exists mknod: dev/acl0: File exists mknod: dev/ac0: File exists mknod: dev/mtr0: File exists cp used greatest stack depth: 14152 bytes left **************prepare var***************** busybox init and set aff init started: BusyBox v1.20.1 (2021-06-07 21:31:56 CST) chmod: /userfs/profile.cfg: Read-only file system yaffs: dev is 32505865 name is "mtdblock9" rw yaffs: passed flags "tags-ecc-off" mount: mounmount used greatest stack depth: 14056 bytes left ting debugfs on /sys/kernel/debug failed: No such file or directory module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint tcsmux version: tcsmux V1.1.0.0 (Apr 29 2019-17:30:04). tcportbind version: tcportbind V1.1.0.0 (Apr 29 2019-17:30:06). vlantag_drv_init TCSUPPORT_IPV6 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Jun 7 2021-21:48:38). find led.conf error led path:/userfs/led.conf insmod used greatest stack depth: 14008 bytes left tccicmd V1.1.0.0 (Jun 7 2021-21:48:42) SIFMaster 0.1 init Register sifm cmd Reading MT7592 EEPROM from flash reservearea mtd[readflash]:device=reservearea tclen=512 tcoffset=393216 Unlocking reservearea ... Reading from reservearea to /etc/RT30xxEEPROM.bin ... insmod ETH_LAN driver macType = 0 qdma_lan: physical_size is 0x00200000 ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: 4C:C5:3E:4B:76:70 User Internal switch ,type 10 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 0 tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (8, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0xb000) tcPhyVerLookUp 3852 9412 7512 Fe, [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0xb000) tcPhyVerLookUp 3852 9451 7512 Ge, [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x1) GE Rxet cal (1)(0)(0)(0x21) GE Rxet cal (2)(0)(0)(0x22) GE Rxet cal (3)(0)(0)(0x23) GE Rxet cal (4)(0)(0)(0x24) GE Rxet cal (5)(0)(0)(0x25) GE Rxet cal (6)(0)(0)(0x26) GE Rxet cal (7)(0)(0)(0x27) GE Rext AnaCal Done! (8)(0x28) GE Rext AnaCal Done! (8)(0x28) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE R50 AnaCal Done! (7) (0x22)(0xa2) GE R50 AnaCal Done! (8) (0x20)(0xa0) GE Tx offset AnaCal Done! (3)(0x3) GE Tx offset AnaCal Done! (6)(0x26) GE Tx offset AnaCal Done! (1)(0x1) GE Tx offset AnaCal Done! (7)(0x27) GE Tx amp AnaCal Done! (pair-0)(0x12)(0x3c10) GE Tx amp AnaCal Done! (19) (0xd) GE Tx amp AnaCal Done! (pair-1)(0x17)(0xc10) GE Tx amp AnaCal Done! (22) (0xa) GE Tx amp AnaCal Done! (pair-2)(0x19)(0xd20) GE Tx amp AnaCal Done! (21) (0xb) GE Tx amp AnaCal Done! (pair-3)(0x21)(0x1020) GE Tx amp AnaCal Done! (18) (0xe) tcPhyVerLookUp 3852 9412 7512 Fe, FE-8 R50 ... (1)(0)(0x21)(0x21) FE-8 R50 AnaCal Done! (2)(0x22) FE-8 Tx offset AnaCal Done! (2)(1)(0x1) FE Tx amp AnaCal Saturation! (45) (ce00)(0)(0)(0) (5) FE-8 Tx amp AnaCal Saturation! (45)(0x3f) FE-8 Tx amp AnaCal Saturation! (45)(0x3f) FE-8 Tx amp AnaCal wait! (1) FE-8 Tx amp AnaCal Done! (9)(0x1b) FE-8 Tx amp AnaCal Done! (3)(0xd) tcPhyVerLookUp 3852 9412 7512 Fe, FE-9 R50 ... (1)(0)(0x21)(0x21) FE-9 R50 ... (2)(0)(0x22)(0x22) FE-9 R50 AnaCal Done! (3)(0x23) FE-9 Tx offset AnaCal Done! (62)(-2)(0x22) FE Tx amp AnaCal Saturation! (45) (ca00)(ce00)(0)(0) (5) FE-9 Tx amp AnaCal Saturation! (45)(0x3f) FE-9 Tx amp AnaCal Saturation! (45)(0x3f) FE-9 Tx amp AnaCal wait! (1) FE-9 Tx amp AnaCal Done! (9)(0x1b) FE-9 Tx amp AnaCal Done! (5)(0xb) tcPhyVerLookUp 3852 9412 7512 Fe, FE-10 R50 ... (1)(0)(0x21)(0x21) FE-10 R50 ... (2)(0)(0x22)(0x22) FE-10 R50 AnaCal Done! (3)(0x23) FE-10 Tx offset AnaCal Done! (61)(-3)(0x23) FE Tx amp AnaCal Saturation! (45) (ca00)(0)(ce00)(0) (5) FE-10 Tx amp AnaCal Saturation! (45)(0x3f) FE-10 Tx amp AnaCal Saturation! (45)(0x3f) FE-10 Tx amp AnaCal wait! (1) FE-10 Tx amp AnaCal Done! (8)(0x1a) FE-10 Tx amp AnaCal Done! (1)(0xf) tcPhyVerLookUp 3852 9412 7512 Fe, FE-11 R50 ... (1)(0)(0x21)(0x21) FE-11 R50 AnaCal Done! (2)(0x22) FE-11 Tx offset AnaCal Done! (64)(0)(0x0) FE Tx amp AnaCal Saturation! (45) (ca00)(0)(0)(ce00) (5) FE-11 Tx amp AnaCal Saturation! (45)(0x3f) FE-11 Tx amp AnaCal Saturation! (45)(0x3f) FE-11 Tx amp AnaCal wait! (1) FE-11 Tx amp AnaCal Done! (8)(0x1a) FE-11 Tx amp AnaCal Done! (1)(0xf) Exec. Successful Exec. Successful Exec. Successful eth0: starting interface. netif_start_queue macType = 0 qdma_wan: physical_size is 0x00100000 Exec. Successful Exec. Successful Exec. Successful install dmt for mt7510 7512_debug: dmt_base_addr : bf900000 ADSL DMT initialization starting Begin AdslTaskInit..... End AdslTaskInit Begin to request IRQ 20 DMT:Succeed to request IRQ 20 Initializing ADSL F/W 5.10.6.0 ...... Initializing ADSL F/W ........ done insmod used greatest stack depth: 13652 bytes left TCSUPPORT_WLAN TCSUPPORT_WLAN_MT7592 register mt_drv mt7603eap.ko zyWlan_evt_init: Enter. mt7603eap.ko zyWlan_evt_init: create socket successfully PCI: Enabling device 0000:01:00.0 (0000 -> 0002) === pAd = c1082000, size = 823712 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc0f80000, csr_addr=0xc0f80000! device_id =0x7603 RtmpChipOpsHook(507): Not support for HIF_MT yet! mt7603_init()--> mt_bcn_buf_init(224): Not support for HIF_MT yet! <--mt7603_init() Mirror/redirect action on insmod: can't insert '/lib/modules/2.6.36/cls_fw.ko': No such file or directory ifconfig: SIOCGIFFLAGS: No such device Ebtables v2.0 registered insmod used greatest stack depth: 13448 bytes left insmod used greatest stack depth: 13156 bytes left HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSzie:80B, foeNum:81 92 IP check use Black List **************lan port init***************** four ports TC3162 hardware watchdog initialized netif_stop_queue device eth0.1 entered promiscuous mode br0: port 1(eth0.1) entering learning state br0: port 1(eth0.1) entering learning state device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entering learning state br0: port 2(eth0.2) entering learning state device eth0.3 entered promiscuous mode br0: port 3(eth0.3) entering learning state br0: port 3(eth0.3) entering learning state device eth0.4 entered promiscuous mode br0: port 4(eth0.4) entering learning state br0: port 4(eth0.4) entering learning state device eth0 is not a slave of br0 eth0: starting interface. netif_start_queue log cicmd 0 (wan dmt2 set largeD 2 ) w used greatest stack depth: 12592 bytes left date: invalid date '010100002012' /etc/init.d/rcS: line 1471: /userfs/bin/wpa_supplicant: not found CO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1 Jan 1 00:00:45 crond[732]: crond: crond (busybox 1.20.1) started, log level 8 START disable Lan and Wan... ln: /dev/log: File exists 1970-01-01 00:00:46 dnsmasq<759>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 23 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr23 successfully dnsmasq: unknown user or group: root unknown user or group: rootFAILED to start up1970-01-01 00:00:47 zcmd<767>, zcmd .c:6329, main(), INFO: Start ZCMD daemon 1970-01-01 00:00:47 zcmd<768>, uitimer.c:95, UITimerProc(), INFO: thread starts zcfg_schema.bin killall: zywifid_run.sh: no process killed The device support wifi! killall: zywifid: no process killed 1970-01-01 00:00:47 zywifid<785>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 40 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr40 successfully zywifid> [ALERT] wifi_module_init:1139: load libzywl_001_ecn.so .......... *reg=0000001c value:68106810 Load NComm TMS Module. Find MTD Device /dev/mtd1 with name romfile. mtd.oobsize 64 mtd.writesize 2048 romfile type ffff romfile size 4294967295 romfile crc 65535 zywifid> [ALERT] main:1274: Check and fix Wifi MAC address...... NComm TMS V6.80 -~-Kernel Module loaded. Please press Enter to activate this console. rm: can't remove '/tmp/wifiScanTime *': No such file or directory MAX Number of Interface Stack is 254 Enter zcmdTr98MapTableInit zcmdTr98ParmAttrNodeBuild: zcmdTr98ParmAttrNodeBuild: obj 69024 5,1,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=1 zcmdTr98ParmAttrNodeBuild: obj 69024 6,1,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=2 zcmdTr98ParmAttrNodeBuild: obj 66588 1,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=3 zcmdTr98ParmAttrNodeBuild: obj 66588 2,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=4 zcmdTr98ParmAttrNodeBuild: obj 66588 3,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=5 zcmdTr98ParmAttrNodeBuild: obj 66744 1,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=6 zcmdTr98ParmAttrNodeBuild: obj 66744 2,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=7 zcmdTr98ParmAttrNodeBuild: obj 66744 3,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=8 zcmdTr98ParmAttrNodeBuild: obj 14976 0,0,0,0,0,0 nSetParmAttr 2 setParmAttrNodeLst Add, n=9 zcmdTr98ParmAttrNodeBuild: obj 17400 0,0,0,0,0,0 nSetParmAttr 1 setParmAttrNodeLst Add, n=10 mainDhcpPoolInfo[0]= 1 [1 0] mainDhcpPoolInfo[1]= 0 [0 0] mainDhcpPoolInfo[2]= 0 [0 0] mainDhcpPoolInfo[3]= 0 [0 0] mainDhcpPoolInfo[4]= 0 [0 0] mainDhcpPoolInfo[5]= 0 [0 0] mainDhcpPoolInfo[6]= 0 [0 0] mainDhcpPoolInfo[7]= 0 [0 0] mainDhcpPoolInfo[8]= 0 [0 0] mainDhcpPoolInfo[9]= 0 [0 0] mainDhcpPoolInfo[10]= 0 [0 0] mainDhcpPoolInfo[11]= 0 [0 0] mainDhcpPoolInfo[12]= 0 [0 0] mainDhcpPoolInfo[13]= 0 [0 0] mainDhcpPoolInfo[14]= 0 [0 0] mainDhcpPoolInfo[15]= 0 [0 0] zcmdTr98MapTableInit End 1970-01-01 00:00:49 zcmd<767>, zcmd.c:6428, main(), INFO: tr98 map table inited zcmdReleaseTr98ObjParamMapping: no this object mapping zcmdReleaseTr98ObjParamMapping: object 89808 has mapping object zcmdReleaseTr98ObjParamMapping: object index attr zcmdReleaseTr98ObjParamMapping: object index 1 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping with data zcmdTr98MappingGrpQry: obj 89808 1,0,0,0,0,0 queried group 0 zcmdTr98MtRecognizeRDMappingOnRelease: objnum 89808, List obj 89808 =====zcmdTr98MtObjDelete=====seqnum=158 =====zcmdTr181MtObjDelete=====oid=89808 zcmdReleaseTr98ObjParamMapping: object index 2 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 3 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 4 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 5 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 6 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 7 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 8 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 9 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data zcmdReleaseTr98ObjParamMapping: object index 10 zcmdReleaseTr98ObjParamMapping: Release object 89808 mapping without data 1970-01-01 00:00:49 zcmd<767>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 1 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr1 successfully 1970-01-01 00:00:49 zcmd<807>, zcmd_config_apply.c:1575, zcmdModuleConfigHandleT ask(), INFO: thread starts 1970-01-01 00:00:49 zcmd<807>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 69 bind server socket 4 on /var/lib/.sock/zcfg_sockaddr69 successfully 1970-01-01 00:00:49 zcmd<806>, zcmd_config_apply.c:1657, zcmdConfigApplyTask(), INFO: thread starts 1970-01-01 00:00:49 zcmd<806>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 67 bind server socket 5 on /var/lib/.sock/zcfg_sockaddr67 successfully 1970-01-01 00:00:49 esmd<815>, esmd.c:2289, main(), INFO: ESMD Start ESMD msg server init... 1970-01-01 00:00:49 esmd<815>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 2 bind server socket 0 on /var/lib/.sock/zcfg_sockaddr2 successfully [ESMD] Initial kernel monitor ... kernelFd=6 set user_pid flag to 815 1970-01-01 00:00:49 zcmd<822>, zcmd.c:5752, zcmdActiveZtr69(), INFO: thread star ts FW_WATCHER Start Find MTD Device /dev/mtd8 with name wwan. mtd.oobsize 64 mtd.writesize 2048 Notice: zyUtilUpdateWWANPackage, No WWAN Package in Flash! wwanpackage info: revision is 1.18 1970-01-01 00:00:49 esmd<830>, esmd.c:2151, timer_thread(), INFO: thread starts zyUtilTcpSvrInit 1970-01-01 00:00:49 esmd<829>, esmd.c:1770, _esmd_thread(), INFO: ESMD ground th read starts 1970-01-01 00:00:49 esmd<829>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 66 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr66 successfully 1970-01-01 00:00:49 esmd<828>, esmd.c:1762, _esmd_thread(), INFO: ESMD usr confi g thread starts zcmdBeInit(): DL opening... Initial begui_customization.... Initial bedevice.... insmod: can't insert '/lib/modules/2.6.36/ipt_TRIGGER.ko': No such file or direc tory insmod: can't insert '/lib/modules/2.6.36/xt_connlimit.ko': No such file or dire ctory insmod: can't insert '/lib/modules/2.6.36/xt_time.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_multiport.ko': No such file or dire ctory insmod: can't insert '/lib/modules/2.6.36/xt_pkttype.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_length.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/xt_recent.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/nfnetlink_queue.ko': No such file or d irectory insmod: can't insert '/lib/modules/2.6.36/xt_NFQUEUE.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_mark.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_state.ko': No such file or director y insmod: can't insert '/lib/modules/2.6.36/xt_limit.ko': No such file or director y insmod: can't insert '/lib/modules/2.6.36/xt_mac.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_LOG.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_tcpmss.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/xt_iprange.ko': No such file or direct ory insmod: can't insert '/lib/modules/2.6.36/xt_helper.ko': No such file or directo ry insmod: can't insert '/lib/modules/2.6.36/iptable_mangle.ko': No such file or di rectory insmod: can't insert '/lib/modules/2.6.36/xt_dscp.ko': No such file or directory insmod: can't insert '/lib/modules/2.6.36/xt_DSCP.ko': No such file or directory ip6_tables: (C) 2000-2006 Netfilter Core Team insmod: can't insert '/lib/modules/2.6.36/nf_defrag_ipv6.ko': No such file or di rectory Chain MACFILTER already exists. devObj->DeviceSummary = InternetGatewayDevice:1.4[](Baseline:1,EthernetLAN:2,WiF iLAN:1,ADSLWAN:1,ADSL2WAN:1,VDSL2WAN:1,PTMWAN:1,EthernetWAN:1,QoS:1,Time:1,IPPin g:1), Initial bedsl.... G.inp mode ANNEXAIJLM annex auto-switch flag = 0 G.dmt T1.413 G.lite Adsl2 Adsl2plus Vdsl2 is supported!! system_sirial_no_eoc[0]=53 system_sirial_no_eoc[1]=32 system_sirial_no_eoc[2]=30 system_sirial_no_eoc[3]=30 system_sirial_no_eoc[4]=59 system_sirial_no_eoc[5]=34 system_sirial_no_eoc[6]=34 system_sirial_no_eoc[7]=30 system_sirial_no_eoc[8]=38 system_sirial_no_eoc[9]=32 system_sirial_no_eoc[10]=35 system_sirial_no_eoc[11]=31 system_sirial_no_eoc[12]=39 system_sirial_no_eoc[13]=5f system_sirial_no_eoc[14]=31 system_sirial_no_eoc[15]=33 system_sirial_no_eoc[16]=31 system_sirial_no_eoc[17]=32 system_sirial_no_eoc[18]=54 system_sirial_no_eoc[19]=32 system_sirial_no_eoc[20]=30 system_sirial_no_eoc[21]=42 system_sirial_no_eoc[22]=5f system_sirial_no_eoc[23]=41 system_sirial_no_eoc[24]=42 system_sirial_no_eoc[25]=57 system_sirial_no_eoc[26]=4c system_sirial_no_eoc[27]=30 system_sirial_no_eoc[28]=62 system_sirial_no_eoc[29]=34 serial_len=30 Initial beatmlink.... Initial beptmlink.... Initial belog.... killall: tty_log_echo: no process killed killall: mailsend: no process killed killall: syslog-ng: no process killed Set interval time = 60 second br0: port 1(eth0.1) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 4(eth0.4) entering forwarding state Error resolving user; user='root' Initial besysinfo.... Initial beaccount.... mkdir: can't create directory '/var/tmp': File exists run new supervisor pwd algorithm run new supervisor pwd algorithm chmod: /data/zcfg_predef.json: No such file or directory chmod: /data/zcfg_predef.json: No such file or directory Initial bedevinfo.... 1970-01-01 00:00:55 zcmd<821>, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendt o /var/lib/.sock/zcfg_sockaddr9, errno = 2(No such file or directory), srcEid = 1, dstEid = 9, type = 273 without reply, oid = 0 1970-01-01 00:00:55 zcmd<821>, zcfg_msg.c:822, zcfg_msg_sendAndGetReply(), ERROR : fail to send message. ret = -5 Initial beethlink.... Initial beethintf.... auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down auto, Auto-negotiation enabled. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Link is down Initial bewifi_radio.... Initial bewifi_ssid.... Initial bewifi_ap.... 1970-01-01 00:01:10 zcmd<821>, zcmd_config_apply.c:852, zcmdPreSetApply(), ERROR : Get current object fail, oid[59640] eid[1] Initial bebridging.... Initial bebridgingbr.... Initial bebridgePort.... device eth0.1 left promiscuous mode br0: port 1(eth0.1) entering forwarding state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entering forwarding state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entering forwarding state device eth0.4 left promiscuous mode br0: port 4(eth0.4) entering forwarding state device ra0 is not a slave of br0 interface ra1 does not exist! interface ra2 does not exist! interface ra3 does not exist! device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode TX_BCN DESC a730e000 size = 320 RX[0] DESC a67d0000 size = 2048 RX[1] DESC a67d1000 size = 2048 ERROR!!! Your no. of SSIDs( = 1) does not match your BssidNum( = 4)! cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 Key1Str is Invalid key length(1) or Type(0) Key2Str is Invalid key length(1) or Type(0) Key3Str is Invalid key length(1) or Type(0) Key4Str is Invalid key length(1) or Type(0) [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860AP/SingleSKU.dat FW Version:CL173766-A FW Build Date:20170925114906 CmdAddressLenReq:(ret = 0) CmdFwStartReq: override = 1, address = 1048576 CmdStartDLRsp: WiFI FW Download Success AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! @@@ NICReadEEPROMParameters : pAd->FWLoad=0 now bb MainSsid mac 00:aa:bb:01:23:40 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 32 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2577): Not support for HIF_MT yet! MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0 [PMF]ap_pmf_init:: apidx=3, MFPC=0, MFPR=0, SHA256=0 AsicSetRalinkBurstMode(4230): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4217): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 00:aa:bb:01:23:40 <==== rt28xx_init, Status=0 @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f jiffies=ffffaa56, POLLING_MODE_DETECT_INTV=300 WiFi Startup Cost (ra0): 3.620s device ra0 entered promiscuous mode ##### mbss_cr_enable, BssId = 1 device ra1 entered promiscuous mode ##### mbss_cr_enable, BssId = 2 device ra2 entered promiscuous mode ##### mbss_cr_enable, BssId = 3 device ra3 entered promiscuous mode Initial bebridgeFilter.... Initial bewifi.... Initial beipiface.... zywifid:Config> [ERROR] zyWifiUpdateLanInfo:468: No wifi interface on module(ECN ). br0: port 8(ra3) entering forwarding state br0: port 8(ra3) entering forwarding state br0: port 7(ra2) entering forwarding state br0: port 7(ra2) entering forwarding state br0: port 6(ra1) entering forwarding state br0: port 6(ra1) entering forwarding state br0: port 5(ra0) entering forwarding state br0: port 5(ra0) entering forwarding state br0: port 4(eth0.4) entering forwarding state br0: port 4(eth0.4) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 3(eth0.3) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 2(eth0.2) entering forwarding state br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state zcmdTr98SyncTr98WANConnectNum: obj 67476 seqnum 180 zcmdTr98SyncTr98WANConnectNum: obj 67476 seqnum 180 zcfgBeWanInitIntfMark : Enter zcfgBeWanInitIntfMark: Init IfMark Done !! Initial benatIntf.... modprobe: module nf_nat_ftp not found in modules.dep modprobe: module nf_conntrack_ftp not found in modules.dep modprobe: module nf_nat_ftp not found in modules.dep modprobe: module nf_nat_tftp not found in modules.dep ftp switch turn on modprobe: module nf_nat_sip not found in modules.dep sip switch turn on conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted. conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted. modprobe: module nf_conntrack_rtsp not found in modules.dep modprobe: module nf_nat_rtsp not found in modules.dep rtsp switch turn on modprobe: module nf_nat_pptp not found in modules.dep pptp switch turn on ipsec switch turn on,sw_state= iptables: Bad rule (does a matching rule exist in that chain?). Initial bev4addr.... Initial bev6addr.... Initial bev6prefix.... Initial beusbhost.... Initial beusbintf.... Initial beusbport.... Initial berouter.... Initial berainfo.... Initial bedhcp4_server.... Initial bedhcp4_serverpool.... Initial bedhcp4_serverpool_staticaddr.... Initial bedhcp4_serverpool_option.... Initial bedhcp4_serversubnet.... restart DNSMASQ... killall: dnsmasq: no process killed 1970-01-01 00:01:26 dnsmasq<1541>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr23 successfully Initial bedhcp4_relay.... Initial bedhcp6_server.... Initial bedhcp6_serverpool.... killall: dhcp6s: no process killed restart dhcp6s... restart dhcp6s... Initial bevlanTerm.... Initial bepppiface.... [pppIfaceObj->Username=] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 [pppIfaceObj->Username=Winduser@tellas.gr] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 [pppIfaceObj->Username=Winduser@tellas.gr] beConfigBoot 113 zcmdTr98SyncTr98WANConnectNum: obj 65472 seqnum 194 Initial bepppifaceipcp.... Initial bedhcp4_client.... Initial bedhcp6_client.... 1970-01-01 00:01:26 zcmd<821>, be_dhcp6_client_config_init.c:29, beConfigBoot(), INFO: boot Dhcp6 Client Initial beradvd.... Initial bedns.... Initial bedns_route.... Initial bedns_server.... Initial benat_port_map.... Initial benat_port_trigger.... Initial benat_addr_mapping.... Initial besessCtl.... /bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory /bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directory Initial befirewall.... getL1InterfaceUpstream: 605 USB.Interface.1 Compile time options: IPv6 GNU-getopt no-DBus no-i18nbr0: port 5(ra0) entering f orwarding state no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack ipset auth no-DNSSEC loop-detect inotify restart DNSMASQ... br0: port 6(ra1) entering forwarding state getL1InterfaceUpstream: 605 USB.Interface.1 br0: port 7(ra2) entering forwarding state MTPciPollTxRxEmpty AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 RTMPSetPiggyBack(876): Not support for HIF_MT yet! 1970-01-01 00:01:29 dnsmasq<1648>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 8 on /var/lib/.sock/zcfg_sockaddr23 successfully RT28xxPciAsicRadioOff(): Not support for HIF_MT yet! RTMPDrvClose call RT28xxPciAsicRadioOff fail !! tx_kickout_fail_count = 0 tx_timeout_fail_count = 0 rx_receive_fail_count = 0 alloc_cmd_msg = 78 free_cmd_msg = 78 br0: port 8(ra3) entering forwarding state Initial betr69.... TX_BCN DESC a730e000 size = 320 RX[0] DESC a67d0000 size = 2048 RX[1] DESC a67d1000 size = 2048 cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=1 APSDCapable[1]=1 APSDCapable[2]=1 APSDCapable[3]=1 APSDCapable[4]=1 APSDCapable[5]=1 APSDCapable[6]=1 APSDCapable[7]=1 APSDCapable[8]=1 APSDCapable[9]=1 APSDCapable[10]=1 APSDCapable[11]=1 APSDCapable[12]=1 APSDCapable[13]=1 APSDCapable[14]=1 APSDCapable[15]=1 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=1 [PMF]Set_PMFMFPC_Proc:: apidx=3, Desired MFPC=1 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=3, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=3, Desired PMFSHA256=0 Initial beddns.... Initial betime.... Initial bediagnostic.... killall: tmsctl: no process killed Initial beschedule.... Initial beparenCtl.... FW Version:CL173766-A FW Build Date:20170925114906 AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! @@@ NICReadEEPROMParameters : pAd->FWLoad=1 now bb MainSsid mac 4c:c5:3e:4b:76:70 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 32 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2577): Not support for HIF_MT yet! RTMPSetPhyMode(): channel out of range, use first ch=0 MCS Set = ff ff 00 00 01 SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=1, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=2, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E [PMF]ap_pmf_init:: apidx=3, MFPC=1, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=1, MFPR=0 [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNI E AsicSetRalinkBurstMode(4230): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4217): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 4c:c5:3e:4b:76:70 <==== rt28xx_init, Status=0 @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f jiffies=ffffb0dd, POLLING_MODE_DETECT_INTV=300 WiFi Startup Cost (ra0): 7.450s br0: port 5(ra0) entering forwarding state br0: port 5(ra0) entering forwarding state Initial beqos.... Initial beqosQueue.... Initial beqosClass.... Initial beqosShaper.... Initial beqosPolicer.... Initial be6rd.... Initial beigmp.... cp: can't stat '/etc/mcpd_igmp.conf': No such file or directory beigmp! /bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent difconfig us ed greatest stack depth: 12344 bytes left irectory [beIgmpCreateCfg](120) Failed. Initial besnmp.... Boot SNMP Initial bemld.... ppe cmd done! cp: can't stat '/etc/mcpd_mld.conf': No such file or directory ppe cmd done! ppe cmd done! cat: can't open '/var/run/ecmh.pid': No such file or directory sh: you need to specify whom to kill ppe cmd done! **** MLD: Interface br0 Snooping Enable!! ppe cmd done! ppe cmd done! ppe cmd done! Initial bevcAutoHunt.... ppe cmd done! Initial bevlanAutoHunt.... Initial beupnp.... Initial bemacfilter.... Initial bemacfilter_whitelist.... Initial beuserinterface.... Initial beremoMgmt.... done ==>Set_Debug_Proc() <==Set_Debug_Proc(RTDebugLevel = 0) mount: mounting devpts on /dev/pts failed: Device or resource busy <Address> <Value> 0xbfb540a4 0x1e000800 device ra0 is already a member of a bridge; can't enslave it to bridge br0. device ra1 is already a member of a bridge; can't enslave it to bridge br0. device ra2 is already a member of a bridge; can't enslave it to bridge br0. device ra3 is already a member of a bridge; can't enslave it to bridge br0. [zywifid] - WlanScheAccess = OFF Initial bechangehosticon.... Initial behosts.... Initial behostshost.... Initial becert.... Initial beportmirror.... Initial bedslite.... Initial beSTBVendorID.... Initial berip.... killall: ripd: no process killed Initial betr64.... Initial bewlan_scheduler.... Initial bewwanbackup.... Initial besamba.... starting smbd. samba start ok wwanbackup info: WWANBACKUP start wwanbackup info: WWANBACKUP_DEBUG is 0 Initial bednsentry.... writing RSA key Initial http with port(443), SSL enable. Initial http with port(80), SSL disable. 1970-01-01 00:01:42 zhttpd<1784>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: E ID 15 bind server socket 52 on /var/lib/.sock/zcfg_sockaddr15 successfully Initial bezx.... Initial bedlna.... Initial bevlangroup.... Initial beTFTPServerName.... Initial bemosUserConfig.... /bin/sh: /usr/etc/init.d/init_cdbg.sh: not found /bin/sh: /usr/etc/init.d/init_mosapp.sh: not found Back-end module init finished Initial USB driver... SCSI subsystem initialized turn on ztr69 cwmp_init:1598 : getpid() = 1861 exFAT: Version 1.2.9 zcfgObjectPathListToStruct: clear objectPathList zcfgObjectPathListToStruct: clear objectPathList zcfgFeTr98QueryHandleRoutInit zcfgFeTr181SpvHandleRoutInit zcfgFeTr181QueryHandleRoutInit cwmp_get_acsInfo: reset redirect server resolveSrvUrlName() availableMode=, unknown case! resolveSrvUrlName(): getaddrinfo fail!! ret:-2 1970-01-01 00:01:44 ztr69<1890>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EI D 9 bind server socket 53 on /var/lib/.sock/zcfg_sockaddr9 successfully usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. QFP USB PHY config port 0 u2_slew_rate_calibration FM_OUT value = 143(0x0000008F) SR calibration value = 4 port 1 u2_slew_rate_calibration FM_OUT value = 143(0x0000008F) SR calibration value = 4 USB driver version: 751221.2.20160516 xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1 xhc_mtk xhc_mtk: irq 18, io mem 0x1fb90000 [/sbin/wwan-package-match.sh] VID 1d6b no match, exit hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected /bin/sh: /etc/init.d/mcpd.sh: not found START enable Lan and Wan... TR181 object IP.Interface.1 zyExtRemoteMgmtSrvObjGet : Enter l3fwdObjGet : Enter l3fwdGetDfGwByRtTable: enter, 4 l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!! /bin/sh: zyims.sh: not found [/sbin/wwan-package-match.sh] VID 1d6b no match, exit 1970-01-01 00:01:47 esmd<828>, esmd.c:1724, processRequest(), WARNING: process m sg type = 235 without reply, oid = 0, from EID = 1 by 5481 ms zcmd.c line 5697, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FIN ECONET/zcmd_wrapper.c line 2196, zcmdEnableConfigSave() : enable tr98mapTableSav eFlag and configSaveFlag bePtmLinkStatGet : Enter ============================================================================ UPnP Mapping table Dump: TR98 Object Name : UP nP service Id InternetGatewayDevice.Layer3Forwarding : ur n:upnp-org:serviceId:Layer3Forwarding.1 ============================================================================ l3fwdObjGet : Enter l3fwdGetDfGwByRtTable: enter, 4 l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!! [/sbin/usb-hotplug.sh] add /var/usb/usb1 1970-01-01 00:01:50 zupnp<1952>, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EI D 17 bind server socket 13 on /var/lib/.sock/zcfg_sockaddr17 successfully hotplug:beUsbPortSet: USB Port Alias is cpe- hotplug:beUsbPortSet: USB Port Type is Device [/sbin/wwan-package-match.sh] VID 1d6b no match, exit [/sbin/wwan-package-match.sh] VID 1d6b no match, exit [/sbin/usb-hotplug.sh] add /var/usb/usb2 hotplug:beUsbPortSet: USB Port Alias is cpe- hotplug:beUsbPortSet: USB Port Type is Device
Παράθεση
Γρήγορη Μετάβαση
Zyxel ADSL modems και routers
Αρχή
- www.ADSLgr.com
- Πίνακας Ελέγχου
- Προσωπικά Μηνύματα
- Θέματα που παρακολουθείτε
- Συνδεδεμένοι χρήστες
- Αναζήτηση στo Forum
- Αρχική σελίδα των forums
- Forums
- Επικαιρότητα, γεγονότα και απόψεις
- Ευρυζωνικές συνδέσεις και τεχνολογία
- ADSL, ADSL 2, ADSL 2+ και Broadband Providers
- VDSL, VDSL2 Providers
- ADSL, ADSL 2, ADSL 2+ και Broadband Hardware
- ADSL & Broadband Hardware, routers και modems...
- Alcatel Thomson ADSL modems και routers
- Asus XDSL modems και routers
- AVM ADSL modems και routers
- Cisco ADSL modems και routers
- Draytek ADSL modems και routers
- Linksys ADSL modems και routers
- TP-Link ADSL modems και routers
- MikroTik ADSL modems, routers & routerBOARDs
- Zyxel ADSL modems και routers
- Voice over IP (VoIP) τεχνολογίες και software
- Φορητές συσκευές και Λειτουργικά Συστήματα
- Hardware
- Software
- ADSLgr.com Site Feedback
- ADSLgr.com Projects
- Χαλαρή κουβεντούλα...
- Αγγελίες
«
Προηγούμενο Θέμα
|
Επόμενο Θέμα
»
Bookmarks
Δικαιώματα - Επιλογές
- Δεν μπορείτε να δημοσιεύσετε νέα θέματα
- Δεν μπορείτε να δημοσιεύσετε νέα μηνύματα
- Δεν μπορείτε να αναρτήσετε συνημμένα
- Δεν μπορείτε να επεξεργαστείτε τα μηνύματα σας
Bookmarks